package async_rpc_kernel

  1. Overview
  2. Docs
Platform-independent core of Async RPC library

Install

Dune Dependency

Authors

Maintainers

Sources

async_rpc_kernel-v0.14.0.tar.gz
md5=f435ab9bfb29aa43be1e0aa6b295252b

CHANGES.md.html

v0.10

  • Exposed function Rpc.dispatch', which is like dispatch but returns an Rpc_result.t, which has more information than the Or_error.t returned by dispatch.

113.43.00

  • Add some benchmarks for Pipe_rpc

  • Optimize the server side of Pipe RPC and add an expert interface. This feature will benefit all Pipe RPC implementors.

    At base:

    ┌─────────────────────────┬──────────┬─────────┬────────────┐ │ Name │ Time/Run │ mWd/Run │ Percentage │ ├─────────────────────────┼──────────┼─────────┼────────────┤ │ bench.ml direct write │ 148.87ns │ 126.00w │ 100.00% │ └─────────────────────────┴──────────┴─────────┴────────────┘

    At tip:

    ┌────────────────────────────────┬──────────┬─────────┬────────────┐ │ Name │ Time/Run │ mWd/Run │ Percentage │ ├────────────────────────────────┼──────────┼─────────┼────────────┤ │ bench.ml direct write │ 69.71ns │ 3.00w │ 94.99% │ │ bench.ml direct write expert │ 73.39ns │ │ 100.00% │ └────────────────────────────────┴──────────┴─────────┴────────────┘

    Note: the reason the expert version is slightly slower is identified: if we replace the blits by unsafe_blits in rpc_transport_low_latency.ml, then the expert version becomes faster.

    The RPC tests for Pipe RPC showed a nice improvement on the server side: lower CPU consumption and roughly 20% faster

  • Remove the ~update argument from State_rpc.dispatch.

    Before this feature, the dispatch method for State_rpcs looked like this:

    val dispatch : ('query, 'state, 'update, 'error) t -> Connection.t -> 'query -> update : ('state -> 'update -> 'state) -> ( 'state * ('state * 'update) Pipe.Reader.t * Metadata.t , 'error ) Result.t Or_error.t Deferred.t

    There are a couple of cases where having the update method there can be cumbersome:

    • sometimes the type of the state that it sent over the wire is different from the type that is naturally maintained on the client side.

    • sometimes the update method needs to perform some Async computation to return a new state.

    It feels like the method is trying to be helpful, but has more of a tendency of getting in the way. This feature removes this method.

    The old API may be reinstated by using a Pipe.fold_map as below:

    State_rpc.dispatch rpc connection query

    state, Pipe.fold_map pipe ~init:state ~f:(fun state update -> let new_state = update_state state update in new_state, (new_state, update)), pipe_metadata

  • Add support for State_rpcs in Versioned_rpc.Callee_converts. Implementation and interface very closely resemble that of a Pipe_rpc.

113.33.00

  • Cleans up the implementation-side interface for aborting Pipe_rpcs.

    Summary

    The aborted Deferred.t that got passed to Pipe_rpc implementations is gone. The situations where it would have been determined now close the reading end of the user-supplied pipe instead.

    Details

    Previously, when an RPC dispatcher decided to abort a query, the RPC implementation would get its aborted Deferred.t filled in, but would remain free to write some final elements to the pipe.

    This is a little bit more flexible than the new interface, but it's also problematic in that the implementer could easily just not pay attention to aborted. (They're not obligated to pay attention to when the pipe is closed, either, but at least they can't keep writing to it.) We don't think the extra flexibility was used at all.

    In the future, we may also simplify the client side to remove the abort function on the dispatch side (at least when not using dispatch_iter). For the time being it remains, but closing the received pipe is the preferred way of aborting the query.

    There are a couple of known ways this might have changed behavior from before. Both of these appear not to cause problems in the jane repo.

    • In the past, an implementation could write to a pipe as long as the client didn't disconnect, even if it closed its pipe. Now writes will raise after a client closes its pipe (or calls abort), since the implementor's pipe will also be closed in this case. Doing this was already unsafe, though, since the pipe was closed if the RPC connection was closed.

    • aborted was only determined if a client aborted the query or the connection was closed. The new alternative, Pipe.closed called on the returned pipe, will also be determined if the implementation closes the pipe itself. This is unlikely to cause serious issues but could potentially cause some confusing logging.

  • Blocking RPC implementations (i.e., ones made with Rpc.implement') now capture the backtrace when they raise. This is consistent with what happens in the deferred implementation case, since in that case the implementation is run inside a Monitor.try_with, which captures backtraces as well.

    Here's an example of what a new error looks like:

    ((rpc_error (Uncaught_exn ((location "server-side blocking rpc computation") (exn (Invalid_argument "Float.iround_up_exn: argument (100000000000000000000.000000) is too large")) (backtrace "Raised at file "pervasives.ml", line 31, characters 25-45
    \nCalled from file "result.ml", line 43, characters 17-22
    \nCalled from file "monad.ml", line 17, characters 20-28
    \n")))) (connection_description ("Client connected via TCP" (localhost 3333))) (rpc_tag foo) (rpc_version 1))

  • Actually deprecated deprecated_dispatch_multi functions in Versioned_rpc.

113.24.00

  • When Transfer.Writer.send* raises, send an error to the client.

  • Added Pipe_rpc in Versioned_rpc.Both_convert.

  • Switched to ppx.

  • Expose the lower-level registration hook in Versioned_rpc.

  • Allow custom handling of missed async_rpc heartbeats.

  • Client-side State_rpc dispatch function does not behave well when the reader side of the pipe is closed.

    It should gracefully abort the rpc instead of raising exceptions, or whatever it currently does.

  • Add Rpc.Expert.implement and Rpc.Expert.implement' with a similar interface as One_way.Expert.implement but for 2-way rpcs.

    Exceptions raised by an expert implementations are handled as follow:

    • if the query has already been answered, stop the server (as for one-way expert)

    • if not, send a Rpc_error.Uncaught_exn (as for 2-way rpc)

  • Adds Rpc.Pipe_rpc.dispatch_iter, plus a bunch of additional types to support it. The main reason for this is to reduce space usage: Pipe_rpc.dispatch followed by Pipe.iter_without_pushback consumes ~105 words in the steady state (i.e., when no messages are coming in) while dispatch_iter consumes ~15. I'm sure dispatch can be improved a lot, but a pipe by itself is 46 words, so it can't possibly become as small as dispatch_iter.

    Both cases can be made smaller by making Connection.response_handler a GADT instead of a closure. I plan to do this later.

    One annoying property of the interface is that the only way to cancel a subscription is to use Pipe_rpc.abort, which has a terrible interface. The logical way to improve the interface is to return a record of a Pipe_rpc.t, a Connection.t, and a Query_id.t, which allocates an additional few words. I'd kind of like to do this but it seems counter to the goal of reducing space usage.

  • Adds Rpc.Pipe_rpc.implement_direct, which uses a "direct stream writer" to write results to the other side, rather than using a Pipe.Writer.t. This consumes much less memory, ~15 words per open query as opposed to ~225 for a regular Pipe_rpc implementation.

    A large part of the diff in this feature is the addition of a module Implementation_types, which just contains copies of type definitions from Implementation and Implementations. This is necessary to handle some cyclic type definitions (both of these modules now depend on types defined in the other module).

    This is the implementation-side dual of Pipe_rpc.dispatch_iter.

  • Change Command_rpc.Command to use Versioned_rpc.Callee_converts instead of Versioned_rpc.Both_convert so that commands can be constructed without client-side conversions. Clients remain free to use conversions or not, as appropriate.

    Removed val rpcs from Callee_converts interfaces because nothing appears to use it, and Both_convert does not provide it. Now Both_convert.S can be supplied to satisfy Callee_converts.S.

  • Annotate errors returned by the async-rpc library with the name of the RPC for which the error was returned (if it's an rpc-level error) and a description of the remote side of the connection (the ip:host if connected via a network socket).

  • Bring back val rpcs in versioned_rpc modules.

113.00.00

  • Fixed race in Rpc that caused double connection cleanup.

    Two errors, Connection_closed and a Writer error, (Uncaught_exn(monitor.ml.Error_((exn(\"writer error\"....)))))), occurring at the same time will cleanup the connection twice and call response_handler of open_queries twice with two different errors.

    (((pid 31291) (thread_id 0)) ((human_readable 2015-05-25T10:47:18+0100) (int63_ns_since_epoch 1432547238929886105)) "unhandled exception in Async scheduler" ("unhandled exception" ((monitor.ml.Error_ ((exn ("Ivar.fill of full ivar" (Full _) lib/async_kernel/src/ivar0.ml:329:14)) (backtrace ("Raised at file "error.ml", line 7, characters 21-29" "Called from file "rpc.ml", line 101, characters 8-31" "Called from file "connection.ml", line 251, characters 8-172" "Called from file "core_hashtbl.ml", line 244, characters 36-48" "Called from file "connection.ml", line 248, characters 2-278" "Called from file "async_stream.ml", line 49, characters 53-56" "Called from file "async_stream.ml", line 21, characters 34-39" "Called from file "job_queue.ml", line 124, characters 4-7" "")) (monitor (((name main) (here ()) (id 1) (has_seen_error true) (is_detached false) (kill_index 0)))))) ((pid 31291) (thread_id 0)))))

  • Fixed bugs in Rpc in which a TCP connection's reader was closed before its writer.

  • In Versioned_rpc, eliminated an unnecessary Async cycle when placing RPC messages.

  • Added Rpc.Pipe_rpc.close_reason and Rpc.State_rpc.close_reason, which give the reason why a pipe returned by an RPC was closed.

    These functions take the IDs that are returned along with the pipes by the dispatch functions, so the interface of dispatch did not need to change.

  • Made Rpc.Expert.dispatch expose that the connection was closed, just like One_way.Expert.dispatch.

  • Expose the name of the Versioned_rpc.Menu RPC.

112.35.00

  • Moved Async_extra.Rpc to its own library, Async_kernel_rpc, and abstracted its transport layer.

    Async_kernel_rpc depends only on Async_kernel. This allows Async_rpc to be used in javascript or to try transports tuned for different use cases. Versioned_rpc was moved to Async_rpc_kernel as well.

  • Added Rpc.One_way module, for RPCs that do not expect any response or acknowledgment.

  • Sped up Rpc.Connection.

    We have been able to send 6_000_000 (contentless) one-way messages per second under some idealized circumstances.

  • In Rpc, added an optional heartbeat_config argument to configure the heartbeat interval and timeout.

  • In Rpc, added some information to Connection_closed exceptions.

  • In Rpc.Implementations.create's on_unknown_rpc argument, added a connection_state argument to the `Call variant.

    When using Rpc.Connection.serve, one can put client addresses in the connection_state, so this makes it possible to identify who sent the unknown RPC instead of just saying what the RPC's name and version are.

  • Added Rpc.One_way.Expert, which has an implement function that gives direct access to the internal buffer instead of using a bin-prot reader.

  • Made Rpc not raise an exception if a connection is closed due to heartbeating.

  • Reworked Async_rpc_kernel's Transport implementation to not require a transfer function similar to Async_unix.Writer.transfer.

    Changed the RPC connection to flush the pipe when the writer is closed, which was the only behavior of Async_unix.Writer.transfer that had been relied on.

    With this change, if someone closes the underlying writer by hand the pipes won't be flushed, which should be expected anyway.

  • Fixed an issue where "normal" Pipe_rpc errors caused the connection to shutdown.

    Such errors include querying an unknown RPC or getting an exception raised by the RPC implementation shutdown. Now such errors behave like Rpc errors, i.e. they are completely ignored besides being put in the return value of Pipe_rpc.dispatch.

    Errors that occur later in Pipe_rpc still cause the connection to close, since these should only occur if there is a bug somewhere.

  • In Rpc, connection-closing errors no longer raise top-level exceptions.

    One can now call close_reason : t -> Info.t Deferred.t to get the reason the connection was closed.

  • Added One_way rpcs to Versioned_rpc.

  • Fixed Rpc to not write if the transport is closed.

    The fix doesn't check that the writer is closed, but instead ensure that we don't try to write when we shouldn't. This means that it will still fail if the user close the transport by hand, which they shouldn't do.

    This change requires transport implementations to fail after they have been closed. This is different from the semantics of Async_unix.Writer, but the latter is non-intuitive and makes it hard to check the correctness of the code. Moreover it is only required for Async_unix.Writer.with_flushed_at_close which we don't use.