dns-mirage

An opinionated Domain Name System (DNS) library
IN THIS PACKAGE
  • dns-server: demote log level for various messages (#309 @hannesm)

  • dns-zone: add additional glue: only add if authoritative for nameserver domain
    (#309 @hannesm)

  • BUGFIX: dns-trie: fix lookup when delegations are present, add tests
    (#309 @hannesm)

  • ozone: be more explicit when showing errors (#311 @psafont)

  • dns: avoid polymorphic comparison (#314 @hannesm, reported by @RyanGibb)

  • FEATURE: dns: add LOC resource records (RFC 1876) (#310 @RyanGibb)

v6.2.2 (2022-04-08)

  • BUGFIX dns-trie: the collect_entries function jumped over zone boundaries.
    This lead dns-primary-git to detect changes in zones with subdomains delegated
    to the same name servers, leading to dropping of zones (#308 @hannesm,
    reported by @reynir)

  • BUGFIX dns-server.text: add address glue records for name servers out of the
    authority of this server. This is crucial since dns-primary-git supports
    such glue records to notify these about zone updates (#307 @hannesm)

  • New functionality in dns-zone (dns-server.zone): decode_keys, decode_zones,
    and decode_zones_keys copied from dns-primary-git for reusing in other
    projects (#307 @hannesm)

v6.2.1 (2022-04-01)

  • BUGFIX dns: RTYPE is 16 bit, previously 15 bit were accepted, also check for
    being positive (#304, @hannesm @reynir)

  • dns-server: dns-trie zone check no longer enforces that the nameserver is in
    the nameserve set of the zone, this enables hidden primary setups (fixes #303,
    @hannesm)

v6.2.0 (2022-03-09)

  • New opam package "dnssec" implementing dnssec validation (@reynir @hannesm)

  • Use custom log sources, not the default one from Logs (@reynir @hannesm)

  • BUGFIX dns-resolver: unlisten on the listen port, not the packet src_port
    (#290 @hannesm)

  • dns-resolver: add IPv6 addresses of root servers (fixes #262, @hannesm)

  • dns-resolver: preliminary support for DNSSec (#262 @reynir @hannesm)

  • dns-client: when /etc/resolv.conf modifies, update the list of nameservers
    (#291 @hannesm @reynir)

  • dns-cli: update to cmdliner 1.1.0 (#300 @hannesm)

  • dns-client-mirage: add module type and nameserver_of_string and connect to
    allow creation of a MirageOS device (#297 @dinosaure)

  • dns-cache: add size, capacity, and weight to metrics (#301, fixes #299,
    @hannesm)

v6.1.4 (2022-01-11)

  • dns-client-{mirage,lwt}: avoid multiple simultaneous connection attempts
    to the same resolver. Now, before a connection is initiated, a Lwt_condition
    is put into the client state which subsequent resolution requests wait for
    (#285 @hannesm, review by @reynir, reported by @kit-ty-kate in
    roburio/http-lwt-client#8)

v6.1.3 (2021-12-17)

  • dns-mirage: use tcpip >= 7.0.0 instead of deprecated mirage-stack and
    mirage-protocols (#283 @dinosaure)

v6.1.2 (2021-11-27)

  • dns: avoid exceptions when decoding resource records (#282 @reynir @hannesm)

v6.1.1 (2021-11-19)

  • dns-client: by default, do not send EDNS (#280 @reynir @hannesm)

  • BREAKING dns-certify.mirage: treat key_data as base64 encoded data
    (#280 @reynir @hannesm)

  • mirage: update to mirage-protocols 6.0.0 API (use TCP.listen / UDP.listen)
    resolver: unlisten on UDP port after response has been received (#280 @reynir
    @hannesm)

v6.1.0 (2021-11-10)

  • BUGFIX dns-client: avoid exception on TLS handshake failure (reported by @reynir)

  • FEATURE dns-client: optionally send a edns in the query (reported by @orbitz #276)

  • dns-client: combine send and recv, avoid resource leaks on timeout

v6.0.2 (2021-10-27)

  • dns: remove astring dependency (@hannesm)

  • dns-client: adapt to happy-eyeballs 0.1.0 API (#274 @hannesm)

  • dns-client: avoid List.concat_map, make it available on OCaml 4.08 (@hannesm)

v6.0.1 (2021-10-25)

  • remove rresult dependency (#273 @hannesm, review by @reynir)

v6.0.0 (2021-10-19)

  • use Cstruct.length instead of deprecated Cstruct.len

  • avoid deprecated fmt functions

  • dns-client: send EDNS tcp keepalive with a timeout of 120 seconds if TCP
    is used (@reynir @hannesm)

  • BREAKING dns: Rr_map.get_ttl is now ttl, and takes 'a key -> 'a -> int32
    (instead of b -> int32), Rr_map.with_ttl now is 'a key -> 'a -> int32 -> 'a
    (instead of b -> int32 -> b) (#264 @hannesm)

  • BREAKING dns: Rr_map.A now uses Ipaddr.V4.Set.t, Aaaa uses Ipaddr.V6.Set.t
    (requires ipaddr 5.2.0) (#268 @hannesm)

  • BREAKING dns.cache: type entry now is polymorphic ('a entry = Entry of 'a ...) (instead of Entry of Rr_map.b) (#263 @reynir and @hannesm)

  • BREAKING dns.cache: use a LRU.F.t instead of LRU.M.t (#256 @hannesm)

  • dns.cache: provide get_or_cname and get_any function (#256 #257 @hannesm)

  • BUGFIX dns.cache: update if time to live of cached entry expired
    (reported in #259 by @dinosaure, fix by @reynir and @hannesm)

  • dns-client support DNS-over-TLS (RFC 7858): the type io_addr is now a variant
    of Plaintext (Ipaddr.t * int) or Tls (Tls.Config.client * Ipaddr.t * int)
    By default, ca-certs (ca-certs-nss for MirageOS) are used as trust anchors,
    and the certificate is expected to contain the IP address of the resolver.
    The default resolver (anycast.uncensoreddns.org) certificate is verified by
    hostname, since the let's encrypt certificate does not include an IP address
    in SubjectAlternativeNames (#270 @hannesm)

  • BREAKING dns-client.mirage.Make is extended by a Mirage_clock.PCLOCK
    (#270 @hannesm)

  • BREAKING dns-client, dns-stub: use Dns.proto instead of custom [TCP|UDP]
    (#266 @hannesm)

  • dns-client: use a mutable timeout_ns : int64 instead of
    timeout_ns : int64 ref (#269 @hannesm)

  • BREAKING dns-client: remove ?nameserver from
    getaddrinfo/gethostbyname/gehostbyname6/get_resource_record - if a custom
    nameserver should be queried, a distinct Dns_client.t can be constructed
    (#269 @reynir and @hannesm)

  • dns-client: multiplex over TCP connections (#269 @reynir and @hannesm)

  • dns-client: use happy-eyeballs to connect to all nameservers from
    /etc/resolv.conf sequentially (lwt and mirage) (#269 @reynir and @hannesm)

  • BREAKING dns-client remove UDP support from lwt (#270 @reynir and @hannesm)

  • BREAKING dns-resolver.mirage add DNS-over-TLS support (@reynir @hannesm)

  • BREAKING dns-resolver remove "mode" from codebase, default to recursive
    (a stub resolver is available as dns-stub) (#260 @hannesm)

  • dns-resolver: use dns.cache instead of copy in Dns_resolver_cache
    (#256 @hannesm)

  • BUGFIX dns-resolver: fix responses to queries (reported in #255 by @dinosaure,
    fix in #258 by @reynir and @hannesm)

  • dns-resolver: refactor and cleanup code, remove statistics, remove dead code
    (#258 #261 @reynir @hannesm)

  • dns-stub: reconnect to resolver, resend all outstanding queries
    (#269 @hannesm)

v5.0.1 (2021-04-22)

  • dns-certify: adapt to X.509 0.13.0 API changes (#254 @hannesm)

v5.0.0 (2021-04-14)

  • IPv6 support for client and server (Mirage, Unix, Lwt) (#249 #252 @hannesm)
    This results in breaking changes, especially in the Mirage boilerplate,
    since now a Mirage_stack.V4V6 is needed instead of a Mirage_stack.V4.

  • dns-certify: support EC private keys, now that X509 0.12.0 supports them
    (#252 @hannesm)

v4.6.3 (2021-01-11)

  • dns-server: wildcard support (#248 @hannesm)

  • dns-certify: only dnskey needs to be a valid hostname (#247 @hannesm),
    allow [`raw] Domain_name.t in signing requests (#249 @hannesm)

  • dns-client.resolvconf provides a parser for /etc/resolv.conf (#240 @hannesm),
    used in dns-client.unix and dns-client.lwt (#241 @hannesm)

  • BUGFIX dns-cli notify keys are accepted in namekey_c (#242 @hannesm)

  • BUGFIX dns: revise TXT resource record encoding and storage (for DKIM usage)
    previously RR were cut at 255 characters (fixes #244, #245 @hannesm)

  • BUGFIX dns: decoding of TSIG packets (#250 @hannesm)

  • BUGFIX ocertify: pem file may contain a certificate chain (#246 @hannesm)

v4.6.2 (2020-08-07)

  • fixes for 32 bit support (OCaml-CI now runs on 32 bit) in test suite and EDNS

  • dns: fix EDNS flag decoding and encoding (16 bit only)
    reported in #234 by @dinosaure, fix #235 by @hannesm

  • dns-server: reply to unsupported EDNS version (not 0) with
    rcode=16 (BadVersOrSig), as required by RFC 6891, and tested by DNS flag day
    issue #166, fix in #237 by @hannesm

v4.6.1 (2020-06-20)

  • dns-client.lwt, dns-client.unix: initialize RNG (#232 @hannesm)

  • dns-cli: compatible with mirage-crypto-rng 0.8 (#232 @hannesm)

v4.6.0 (2020-06-02)

  • dns: bugfix for name compression when encoding names at offset > (2 ^ 14) - 1
    (#225 @hannesm)

  • dns: allow unknown DNSKEY algorithm, TLSA certificate usage, selector,
    matching type, SSHFP algorithm and typ. This makes the DNS library
    future-proof for when new values are assigned (#228 @hannesm)

  • dns: enforce a max_rdata_length for all resource records. This ensures that
    when a resource record is loaded into the server, it can be extracted via a
    DNS query and transferred via IXFR/AXFR
    (#230 @hannesm, reported in #229 via #225)

  • AXFR: encode and decode support for AXFR transfers spanning multiple messages
    (#225 @hannesm)

  • client: do not initialize the Mirage_crypto_rng in the library, initialize
    the RNG in applications (#227 @hannesm)

  • certify: provide cert_matches_csr function and use it (cleans up partial
    ad-hoc matches which did not verify that all hostnames of the CSR are present
    in the certificate) (#226 @hannesm, reported in #224)

v4.5.0 (2020-04-23)

  • client: add timeout for DNS requests (defaults to 5 seconds, as in resolv.h).

  • dns-client-mirage functor requires a Mirage_time.S implementation (changes API).
    Update your code as in this commit:
    https://github.com/roburio/unikernels/commit/201e980f458ebb515298392227294e7b508a1009
    #223 @linse @hannesm, review by @cfcs

v4.4.1 (2020-03-29)

  • client: treat '.localhost' and '.invalid' special, as specified in RFC 6761
    and let-localhost-be-localhost. #221 @hannesm, review by @cfcs (who reported
    #220, original report roburio/openvpn#28)

v4.4.0 (2020-03-13)

  • dns-stub, a new opam package, is a stub resolver #209 @hannesm, review by
    @cfcs

  • embed IP address of recursive resolver only once #214 @hannesm, fixes #210,
    review by @cfcs

  • Dns_trie.lookup returns NotAuthoritative if no SOA is present #217 @hannesm,
    review by @cfcs

  • Secondary server is looked up in trie properly (may be in another zone, which
    primary is not authoritative for the other zone) #217 @hannesm, review by
    @cfcs

  • new function Dns.Dnskey.pp_name_key #218 @hannesm, review by @cfcs

  • dns-certify uses new ACME protocol (where the intermediate certificate is
    part of the issuance process) #219 @hannesm, review by @cfcs

  • dns-certify/dns-tsig/dns-cli: use mirage-crypto #219 @hannesm, review by @cfcs

v4.3.1 (2020-01-21)

  • server (#207, @hannesm, review by @cfcs)

    • provide return code and request vs reply statistics

    • BUGFIX update only increase SOA.serial of zones which changed (including regression tests)

    • expose Authentication.access_granted, Authentication.zone_and_operation, Authentication.operation_to_string

  • dns (#207, @hannesm, review by @cfcs)

    • expose Rcode.to_string for metrics above

v4.3.0 (2020-01-09)

  • dns

    • BUGFIX Name_rr_map.remove_sub remove empty maps (#205, @hannesm)

  • server (#205, @hannesm)

    • authentication refactoring: given a key by its Domain_name.t (name._op.zone),
      this is valid for operation op for zone and subdomains thereof. The
      operation may be one of update, transfer, and notify, with an update
      key being valid for any operation, and a transfer key valid for
      notifications as well

    • Primary.create has a new optional argument unauthenticated_zone_transfer
      to allow unsigned zone transfer requests

    • the type Authentication.a and value Authentication.tsig_auth are removed

      • Primary.create and Secondary.create no longer have the a argument

    • authentication uniformly uses Authentication.access

    • handle_update / handle_axfr_request / handle_ixfr_request are provided and
      under test

    • tests for authentication and handle_question

  • client (#204, @hannesm)

    • introduce get_resource_record which is the same as getaddrinfo, but returns
      the error as variant instead of [ `Msg of string ]

    • BUGFIX follow_cname handles replies with a cname and no data for the alias
      appropriately (and a regression test has been developed)

v4.2.0 (2019-11-20)

  • dns
    relax resource record parsing, don't require the name to be a hostname it
    used to be strict on the parser, but that violates RFC 2181 Sec 11

  • dns-certify
    BUGFIX provide signing_request to create certificate signing requests,
    now including all hostnames in subjectAlternativeName (previously, the
    common name was left out which is not what RFC 5280 recommends)
    (#198 @hannesm)

  • dns-server.mirage

    • provide metrics (using the metrics library) of connections and actions (#199 @hannesm)

    • BREAKING the on_update callback passed to primary has more arguments (#200 @hannesm)
      ~authenticated_key : [`raw] Domain_name.t option
      ~update_source : Ipaddr.V4.t

  • dns-server

    • BREAKING handle_buf: returns Domain_name.t of key used for authentication (#200 @hannesm)

    • BUGFIX handle_update: allow modification of multiple zones at once
      still, each name must be within the zone given in Query.name (which
      is authenticated against), allowing hidden let's encrypt secondary
      for multiple zones, using a keys authorized for the root zone (#200 @hannesm)

    • BUGFIX Dns_trie.zone returns the zone (Domain_name.t * Soa.t) of a
      provided Domain_name.t, it now works for non-existing names, tests
      were added (#200 @hannesm)

  • dns-mirage: log packets on debug level instead of info (#198 @hannesm)

v4.1.0 (2019-11-01)

  • Client improvements (#191 #192 @olleolleolle @linse @cfcs @hannesm in marrakesh September)

  • new sublibrary dns.cache providing an LRU cache, mostly copied from resolver

  • it uses a LRU cache now (defaults to 32 entries) from dns.cache

    • since #195 a mutable LRU.M.t

  • tests were added

  • Dns_client_flow has been migrated to Dns_client

  • various code cleanups (extracted functions), better naming, improved docstrings

  • Uflow is now known as Transport

  • requires a monotonic clock on creation

  • adapt to x509 0.8.0 API changes (#193 @hannesm)

  • adapt to newer MirageOS interfaces (#196 @hannesm)

v4.0.0 (2019-08-15)

  • Switch to uDNS implementation, developed from scratch since 2017, primarily
    focusing on a recursive caching resolver. The server part supports dynamic
    updates (RFC 2135), transaction authentication with HMAC (RFC 2845), zone
    transfer (RFC 5936), incremental zone transfer (RFC 1995), change
    notifications (RFC 1996) amongst others.

  • The core library uses a GADT for resource record sets, where the key (resource
    record type) specifies the value type.

  • The API does not leak exceptions, but uses the result type where appropriate.

  • TCP transport is well supported and used widely (client uses it by default)

  • Naming: client is a DNS client, resolver is the recursive resolver library

  • The DNS library is split into the following opam packages and sublibraries:

    • dns - the core library

    • dns-tsig - transaction signatures

    • dns-cli - command line utilities (odig, onotify, ..)

    • dns-client - pure client implementation

      • .unix - DNS client using the Unix module for communication

      • .lwt - DNS client using Lwt_unix for communication

      • .mirage - DNS client using MirageOS for communication

    • dns-certify - helpers for let's encrypt provisioning

      • .mirage - certificate provisioning with MirageOS

    • dns-mirage - generic MirageOS communication layer

    • dns-server - pure server implementation

      • .mirage - MirageOS primary and secondary server

      • .zone - zone file parser (mostly taken from the 1.x series)

    • dns-resolver - pure recursive resolver implementation

      • .mirage - MirageOS recursive resolver

  • Only OCaml 4.07.0 and above are supported

  • Multicast DNS has been dropped for now

  • A client using async from JS has not been implemented yet

  • The default recursive resolver, used by the client implementations, is
    uncensoreddns.org

v1.1.3 (2019-07-16)

  • Support domain-name.0.3.0 interface, which bumps the minimum
    OCaml version supported to 4.04 due to that dependency (@avsm)

  • Fix tests with recent OCaml (use mmap/bigarray-compat) (@avsm)

v1.1.2 (2019-02-28)

  • Mirage: adapt to mirage-kv 2.0.0 interface (#156 by @samoht)

v1.1.1 (2019-01-25)

  • Support Base64.3.0.0 interface (@avsm)

v1.1.0 (2019-01-05)

  • Improve parsing robustness with:

    • invalid pointers in packets

    • taking total packet size limitations into account

    • handling unknown opcodes gracefully without an exception
      Work done by @Willy-Tan in #154.

  • Port build from jbuilder to Dune (#155 #152 #153 by @paurkedal @samoht)

  • Update opam metadata to the 2.0 format.

v1.0.1 (2017-11-06)

  • dns-lwt-unix: add missing dependency on cmdliner (#145 by @avsm)

  • async: close reader and writer properly (#147 by @1yefuwang1)

  • fix build with OCaml 4.06 (and -safe-string) (#148 by @djs55)

v1.0.0 (2017-06-23)

Rearrange the opam packages to eliminate optional dependencies,
and have explicit and separate packages for the Lwt, Async and
Mirage implementations. The opam and ocamlfind layouts now
have the same names:

  • dns: the core package

  • dns-lwt: Lwt implementation

  • dns-lwt-unix: Lwt Unix, including servers

  • dns-async: Async implementation (this currently uses Unix)

This layout is not compatible with the older releases which had
ocamlfind subpackages, so an upper bound will be needed in OPAM
for those. However, porting should be relatively straightforward
to the new release, and in return your users will not have to deal
with specifying a myriad of optional dependencies in OPAM.

  • This release also ports the build to use Jbuilder, which speeds
    it up quite a bit and removes boilerplate files.

  • Depend on Lwt 3.0.0 interfaces, including the blocking bind.

v0.20.2 (2017-06-01)

  • Depend explicitly on Ipaddr_unix and Uri_services modules.

  • Add a basic server example which has a static lookup table and
    does not use the Trie structure. It is in [examples/server.ml].

v0.20.1 (2017-05-16)

  • Port to lwt >= 3.0 (#136, @djs55)

v0.20.0 (2017-03-23)

  • Remove the Dns.Buf module that formerly wrapped Cstruct, now that the
    latter is a mature library.

  • Add an ?alloc optional argument to functions that would formerly accept
    a Dns.Buf. By default, this allocates a single page, but consumers of
    this library can override it in order to supply their own allocation
    logic (e.g. a pool allocator).

  • Remove dependency on io-page to follow the Dns.Buf removal.

All these changes were part of #132 by @hannesm.

v0.19.1 (2017-02-15)

  • Use topkg instead of oasis (#126

  • Do not reverse the order of resource records in the parser (#109 by @djs55)

  • Restrict to OCaml 4.03.0+.

  • Fix bug parsing pointers to pointers to DNS name labels (#129 by @yeungda-rea)

v0.19.0 (2017-01-20)

  • Port to MirageOS 3 module types.

  • Remove runtime dependency on PPX from META file

  • Bugfixes and improvements for async backend compilation (#100 by @vbmithr).

v0.18.1 (2016-04-17)

  • Clear AA bit on requests, as some servers will drop these otherwise

v0.18.0 (2016-03-12)

  • Remove dependency on camlp4, switch to ppx

v0.17.0 (2016-03-11)

  • This library now depends on the hashcons package rather than
    containing a fork of it. Now that there is no LGPL (+ linking exception
    code left, clarify that the license is ISC. Previously the opam
    file claimed a mixture of licenses (#86 via @djs55)).

  • Add multi-distro Travis testing support.

  • Library now depends on OCaml 4.02+

v0.16.0 (2015-10-21)

  • Change source port randomization to avoid overflow in the port range
    (#83 from @yomimono).

Improve mDNS support (#82 from Luke Dunstan):

  • Add Dns.Probe to implement the unique name probing portion of mDNS.

  • Expose the Dns.Name.Set construct.

  • Added a functor Mdns_resolver_mirage.Chain that is intended to compose
    an mDNS resolver with a normal DNS resolver such that *.local is resolved
    via mDNS and everything else is done with DNS.

  • Changed Dns.Query to not respond to queries for classes other than IN.

  • Fixed mDNS legacy responses to use TTL <= 10 sec

  • Fixed mDNS responses to use RD=0.

v0.15.3 (2015-07-30)

  • Fix regression in 0.15.2 which prevented Dns_server_unix.listen from
    answering more than one query (#80 from Magnus Skjegstad)

v0.15.2 (2015-07-04)

  • Fix incorrect mirage dependency on tcpip

  • Improve clarity and formatting of Lwt use

  • Remove camlp4 dependency

  • Now requires lwt >2.4.7

v0.15.1 (2015-07-02)

  • Fix critical DNS resolver timeout bug causing unexpected exceptions

v0.15.0 (2015-05-14)

  • Name.domain_name has been renamed to Name.t and is now abstract

  • Name.domain_name_to_string has been renamed to Name.to_string

  • Name.string_to_domain_name has been deprecated for Name.of_string

  • Name.parse_name has been renamed to Name.parse

  • Name.marshal_name has been renamed to Name.marshal

  • Name.hashcons_charstring has been renamed to Name.hashcons_string

  • Name.hashcons_domainname has been renamed to Name.hashcons

  • Name.canon2key has been renamed to Name.to_key

  • Name.for_reverse has been replaced by Name.of_ipaddr

  • Name.of_ipaddr accepts a Ipaddr.t and produces a name suitable for reverse DNS

  • We now require >= ipaddr.2.6.0 to support Name.of_ipaddr

  • uri 1.7.0+ is now required for its uri.services service registry

  • Named service lookups are now supported in zone files

  • Dig string serializations are now in Dns.Dig (#61 from Heidi Howard

v0.14.1 (2015-03-29)

  • Reduce namespace pollution in name.ml to avoid breaking with Cstruct 1.6.0+.

  • Add a Dns_server.compose function to make it easier to build
    resolution pipelines (#58).

  • Add a Dns_server_mirage functor (#55).

  • Add Dns_resolver.resolve_pkt to support custom query packets (#49).

  • Split out the experimental Async_resolver into a Async_kernel and
    Unix libraries. This introduces the dns.async-unix library.

v0.14.0 (2015-01-29)

  • Renamed Packet.QM to Packet.Q_Normal and QU to Q_mDNS_Unicast for
    clarity and added more detailed doc comments. Added constructor function
    Packet.make_question for convenience. (#41

  • Support io-page 1.3.0+ interface. (#40

v0.13.0 (2015-01-26)

  • Add support for multicast DNS (RFC6762) in the trie. (#35 from Luke Dunstan

  • mDNS doesn't use SOA nor delegation (RFC 6762 section 12), so some minor changes
    to Trie are required to handle this.

  • mDNS doesn't echo the questions in the response (RFC 6762 section 6), except
    in legacy mode, so a bool argument was added to Query.response_of_answer.

  • Query.answer still exists but now Query.answer_multiple is also available
    for answering multiple questions in one query to produce a single answer
    (RFC 6762 section 5.3). One caveat is that responses may exceed the maximum
    message length, but that is not really specific to mDNS. Also, in
    theory multiple questions might require multiple separate response
    messages in unusual cases, but that is complicated and the library
    does not deal with that yet.

  • Query.answer_multiple takes an optional function to allow the caller
    to control the cache-flush bit. This bit is only set for records
    that have been "confirmed as unique". Using a callback requires
    minimal changes here but puts the burden of maintaining uniqueness
    state elsewhere.

  • Query.answer_multiple takes an optional function to filter the
    answer, in order to support "known answer suppression" (RFC 6762
    section 7.1). Again, using a callback requires minimal change to the
    core, but later on the mDNS-specific known answer suppression logic
    could move into the Query module if that turns out to be simpler.

  • A query for PTR returns additional records for SRV and TXT, to
    support efficient service discovery.

  • Trie.iter was added to support mDNS announcements.

  • Switch to Bytes instead of String for eventual -safe-string support.

  • Partially remove some error printing to stderr. (#36

Unit tests were added for some of the changes above, including a test-only
dependency on pcap-format.

v0.12.0 (2014-12-24)

  • Parse and marshal the mDNS unicast-response bit (#29).

  • Add OUnit tests for Dns.Packet.parse using pcap files.

  • Fix parsing of SRV records (#30).

  • Use Bytes instead of String for mutable buffers.

  • Switch to Base64 v2, which uses B64 as the toplevel module name
    to avoid linking conflicts with other community libraries.

v0.11.0 (2014-11-02)

  • Do not depend in Io_page; instead Dns.Buf.create now accepts an
    optional alloc parameter to use a custom allocator such as Io_page.

  • Add Async DNS resolver modules from @marklrh (#22).

  • Add a Dns_resolver_mirage.Static for a static DNS interface.

v0.10.0 (2014-08-20)

  • Add Dns_resolver_mirage module for making stub resolution requests
    using the Mirage module types.

  • Dns.Resolvconf parses /etc/resolv.conf entries using Ipaddr.t
    instead of string values now.

  • Adapt Dns_resolver and Dns_resolver_unix to use Ipaddr.t more.

  • Improve mldig to use Ipaddr more and add more RR printing to
    match the conventional dig tool behaviour.

  • Expose Dns.Packet.Not_implemented exception rather than a pattern
    match failure.

  • Depend on external Base64 package instead of bundling one inside
    the Dns packed module.

  • Add a local opam file for easier pinning.

  • Add an examples/ directory with a DNS forwarder sample (#21).

v0.9.1 (2014-07-29)

  • Fix file descriptor leak in resolver (#15, #16) by expanding commfn
    with a cleanup function.

v0.9.0 (2014-06-16)

  • Ensure that all Dns.Buf.t buffers are page-aligned, via Io_page.

  • Remove a Unix dependency that snuck into the Dns_resolver portable
    core, by adding a timeout argument to the commfn type.

  • Improve ocamldoc in Dns_resolver_unix.

v0.8.1 (2014-04-19)

  • Add process_of_zonebufs to handle multiple zone files.

  • Adapt Dns_server_unix to expose multiple zonebuf functions.

v0.8.0 (2014-02-21)

  • Use Ipaddr.V6 to restore IPv6/AAAA RR support.

  • process_query now takes an output buffer so it doesn't have to
    overwrite the input buffer it just parsed.

  • Add Travis continuous integration scripts.

  • Regenerate with OASIS 0.4.1

  • Split the dns.lwt into a portable dns.lwt-core that doesn't
    require Unix (from which a Mirage version can be built). The only
    change to existing applications is that Unix-specific functions
    have shifted into Dns_resolver_unix or Dns_server_unix, with
    the module types for PROCESSOR and CLIENT unchanged.

v0.7.0 (2013-08-26)

  • Add path argument to `Resolv_conf in Dns_resolver.config.

  • Dns_resolver.t is now a record type rather than a first-class module.

  • Fix mldig server and port options.

  • Change Zone.load_zone to Zone.load and make it functional over Loader.db.

  • Use Ipaddr.V4.t addresses in favor of Cstruct or Uri_IP representations.

  • Fix RRSIG signed type to be of the answer rather than the question.

  • Fix ANY queries.

  • Add Buf to provide a nickname for char Bigarrays.

  • Change Packet.{parse,marshal} to use Buf.t rather than exposing Cstruct.t

  • Change Packet.parse to remove name map parameter

  • Factor protocol modules into Protocol with default DNS implementations

  • Add first-class PROCESSOR module to Dns_server for contextual
    protocol extensions

  • Change Dns_server.listen to accept processor

  • Rename Dns_server.listen_with_zonebuf and Dns_server.listen_with_zonefile
    to Dns_server.serve_with_zonebuf and Dns_server.serve_with_zonefile resp.

  • Add processor_of_process, process_of_zonebuf,
    eventual_process_of_zonefile, and serve_with_processor to Dns_server

  • Rename Query.query_answer to Query.answer

  • Add Query.response_of_answer and Query.answer_of_response

  • Move Dns_resolver.build_query to Query.create

  • By default, DNS packet IDs are randomly generated with Random

  • Dns_resolver now supports simultaneous resolver protocol requests

  • Fix reversed multiple TXT parse bug

  • Move DNSSEC implementation to <//github.com/dsheets/ocaml-dnssec>

v0.6.2 (2013-02-13)

  • Fix Lwt compilation after switch to Dns.Names.Map instead of Hashtbl.

  • Fix Lwt Makefile detection (Lwt.unix instead of Lwt.ssl

v0.6.1 (2013-02-12)

  • Improve performance of packet marshalling.

  • Add a Mirage Dns_server subpackage.

v0.6.0 (2012-12-31)

  • (Very) experimental DNSSEC support.

  • Use cstruct-0.6.0 API.

  • Improve robustness of Dns_resolver.

  • Add EDNS0 support for larger packet sizes.

v0.5.2 (2012-11-28)

  • Fix the server interface to be fully asynchronous.

  • Correct q_type/q_class arguments being ignored in the Lwt
    Dns_resolver (from Pierre Chambart).

v0.5.1 (2012-10-05)

  • Remain compatible with OCaml-3.12.1 with the more verbose
    first-class module syntax.

v0.5.0 (2012-09-29)

  • Add mldig as a full(ish)-featured dig clone, with similar
    output format.

  • Add Dns.Resolvconf for parsing /etc/resolv.conf files on
    POSIX hosts.

  • Move the Lwt bits (resolver, server, cmdline client) into
    a separate directory, to follow the Cohttp convention.

v0.4.0 (2012-09-18)

  • Initial public release.