• Do not Lwt.catch on the listen callback (@hannesm, @dinosaure, #103)

v2.1.0 (2022-02-01)

  • Lint OPAM file (@hannesm, #100)

  • Update the project with cstruct.6.0.0 (@hannesm, #100)

  • Rename OS by Xen_os (@dinosaure, #101)

v2.0.0 (2020-10-21)

  • Adapt to mirage-xen 6.0.0 API changes (Solo5 based Xen PVH, #99 @mato)

v1.13.1 (2020-07-01)

  • MirageOS (mirage-net) defines the MTU as the link-level payload size, adjust from 1514 to 1500 (@hannesm, #98)

  • Only pass the sub-buffer of requested size to the fill function (solves mirage/qubes-mirage-firewall#111, @hannesm, #98)

  • listen: do not catch out of memory exception (@hannesm, #97)

v1.13.0 (2019-11-01)

  • Adapt to mirage-xen 5.0.0 API changes (@hannesm, #95)

  • Adapt to mirage-net 3.0.0 API changes (@hannesm, #95)

v1.12.0 (2019-06-26)

  • Cope with frontend moving directly to Closed state (@talex5, #89)

  • Remove colons in log prefixes (@yomimono, #91)

  • Use mirage-xen.4.0.0 Os_xen interface (@TheLortex, #90)

v1.11.0 (2019-05-05)

  • Fix MAC address for netback devices (@talex5, #87).
    This changes the CONFIGURATION signature to provide both
    read_frontend_mac and read_backend_mac, and changes the XenStore
    implementation to return fe:ff:ff:ff:ff:ff for backends.

v1.10.2 (2019-04-01)

  • Use the new grant API provided by mirage-xen (@talex5 and @yomimono, #85).

v1.10.1 (2019-03-20)

  • Zero buffers before calling fill functions (@yomimono and @hannesm, #83).

v1.10.0 (2019-02-24)

  • Adapt to mirage-net 2.0.0 changes (@hannesm)

v1.9.0 (2019-02-04)

  • Port build from jbuilder to dune (@avsm)

  • Switch to dune-release from topkg (@avsm)

  • Clean up opam build depends and ppx (@avsm)

  • Use lwt-dllist to remove deprecated Lwt_sequence (@avsm)

v1.8.1 (2019-01-07):

  • require OCaml 4.03, remove "result" dependency (#77, from @hannesm)

  • require ipaddr 3.0 (#79, from @hannesm)

1.8.0 (2017-12-14):

  • Support client-initiated shutdown (#67, from @talex5)

  • Improve shared ring handling between Netback and Netfront (#68, from @talex5)

  • Fix a number of build errors and improve documentation (various, from @djs55 and @talex5)

1.7.1 (2016-06-16):

  • Switch to jbuilder

  • Add topkg

  • Split into mirage-net-xen and netchannel

  • Add dependency on io-page-xen

1.7.0 (2017-01-24):

  • Build against MirageOS version 3, and drop support for previous versions.

  • Log exceptions from the listen callback.

  • Use Cstruct.hexdump_pp to dump frames on error.

  • Use the Logs library for logging.

  • Use a monotonic counter for the RX id.

1.6.1 (2016-05-02):

  • Generate a unique ID for each page shared with Xen for receiving data

1.6.0 (2016-04-09):

  • Don't assume the first interface is meant when id can't be decoded

  • Remove camlp4 dependency, add OCaml 4.02.ppx dependency

  • Add simple xen-build Makefile target which tests via Docker

1.5.0 (2016-01-08):

  • Generate a unique ID for each Netfront request. Before, we used
    the grant ref, but multiple requests may use the same ref. This could
    lead to pages being returned to the free pool before they had been
    read by netback.

  • Add netback support, allowing mirage-net-xen to provide virtual
    network interfaces to other domains. This API is currently
    experimental.

  • Add support for fragmented frames, including frames larger than one
    page.

  • Use Cstruct.fillv instead of our own copy (which was incorrect, but
    the buggy path didn't get called unless the frame was fragmented,
    which we didn't support anyway).

  • Use the offset field (previously we assumed it was always zero).

  • listen now starts and returns the polling thread. Before, it
    returned a dummy thread that never resolved. This means that errors in
    the listen thread should now be reported.

  • Errors in the user function passed to listen are now handled by
    Lwt.async (however that is configured). Before, we always printed
    the exception and then continued.

  • Don't discard frames sent before listen is called.

  • Split Shared_page_pool out into its own module.

  • Fixed some compiler warnings.

  • Require shared-memory-ring >= 1.1.1 (#25).

  • Require io-page >= 1.5.0 for page_size (#21).

1.4.1 (2015-03-14):

  • Wait for the backend network device to enter the Connected state
    before transmitting packets. This fixes a race condition in a
    fast-booting unikernel that caused the first packet to be lost (#20, #23).

1.4.0 (2015-03-07):

  • Add explicit connect function to interface (#19).

1.3.0 (2015-01-24):

  • When waiting for space in the transmit queue, we would sometimes fail
    to notice when space became available. (#15)

  • Copy out-bound data into pre-shared pages for performance, security
    and simplicity. (#17)

  • Use a centrally sourced Travis file and test OCaml 4.02+ as well.

1.2.0 (2014-12-17):

  • Add profiling tracepoints and labels (#13).
    Introduces a dependency on mirage-profile.

  • New opam file present in source repository for OPAM 1.2 workflow.

1.1.3 (2014-08-08):

  • Revert the serialization in 1.1.2 as Xen/ARM (4.5 and backport to 4.4)
    has been fixed to support granting the same page multiple times.
    Backport is in https://github.com/mirage/xen-arm-builder.

1.1.2 (2014-07-23):

  • Wait for packets to be processed by the backend before returning from
    a writev call. Without this, the caller has no way to know when
    it's safe to reuse the buffer (#11).

1.1.1 (2014-05-27):

  • Do not send oversized frames to the backend Netfront (#9 from Edwin Torok).

1.1.0 (2014-02-01):

  • Depend on the unified io-page library instead of io-page-xen.

  • Depend on new xen-event and xen-grant packages.

0.9.0 (2013-12-10):

  • Add Travis CI scripts.

  • Adapt to V1.NETWORK from mirage-types-0.5.0.

  • Initial release based on mirage-platform-0.9.8 Netif.