package octez-libs
include Bare_sigs.Seq.S
Common interface with Stdlib
Note that some functions (namely init, take, and drop) are shadowed with exception-less versions.
Note that once is not shadowed. Be careful when using once: the resulting sequence is ephemeral and using in a non-ephemeral way raises an exception. As a safer alternative, you can use Seq_e.of_seq_once which gives you a result-based (exception-less) ephemeral sequence.
include module type of Seq
with type 'a t = 'a Seq.t
and type 'a node = 'a Seq.node
type 'a t = 'a Seq.tA sequence xs of type 'a t is a delayed list of elements of type 'a. Such a sequence is queried by performing a function application xs(). This function application returns a node, allowing the caller to determine whether the sequence is empty or nonempty, and in the latter case, to obtain its head and tail.
A node is either Nil, which means that the sequence is empty, or Cons (x, xs), which means that x is the first element of the sequence and that xs is the remainder of the sequence.
Consuming sequences
The functions in this section consume their argument, a sequence, either partially or completely:
is_emptyandunconsconsume the sequence down to depth 1. That is, they demand the first argument of the sequence, if there is one.iter,fold_left,length, etc., consume the sequence all the way to its end. They terminate only if the sequence is finite.for_all,exists,find, etc. consume the sequence down to a certain depth, which is a priori unpredictable.
Similarly, among the functions that consume two sequences, one can distinguish two groups:
iter2andfold_left2consume both sequences all the way to the end, provided the sequences have the same length.for_all2,exists2,equal,compareconsume the sequences down to a certain depth, which is a priori unpredictable.
The functions that consume two sequences can be applied to two sequences of distinct lengths: in that case, the excess elements in the longer sequence are ignored. (It may be the case that one excess element is demanded, even though this element is not used.)
None of the functions in this section is lazy. These functions are consumers: they force some computation to take place.
val is_empty : 'a t -> boolis_empty xs determines whether the sequence xs is empty.
It is recommended that the sequence xs be persistent. Indeed, is_empty xs demands the head of the sequence xs, so, if xs is ephemeral, it may be the case that xs cannot be used any more after this call has taken place.
If xs is empty, then uncons xs is None.
If xs is nonempty, then uncons xs is Some (head xs, tail xs), that is, a pair of the head and tail of the sequence xs.
This equivalence holds if xs is persistent. If xs is ephemeral, then uncons must be preferred over separate calls to head and tail, which would cause xs to be queried twice.
val length : 'a t -> intlength xs is the length of the sequence xs.
The sequence xs must be finite.
val iter : ('a -> unit) -> 'a t -> unititer f xs invokes f x successively for every element x of the sequence xs, from left to right.
It terminates only if the sequence xs is finite.
val fold_left : ('a -> 'b -> 'a) -> 'a -> 'b t -> 'afold_left f _ xs invokes f _ x successively for every element x of the sequence xs, from left to right.
An accumulator of type 'a is threaded through the calls to f.
It terminates only if the sequence xs is finite.
val iteri : (int -> 'a -> unit) -> 'a t -> unititeri f xs invokes f i x successively for every element x located at index i in the sequence xs.
It terminates only if the sequence xs is finite.
iteri f xs is equivalent to iter (fun (i, x) -> f i x) (zip (ints 0) xs).
val fold_lefti : ('b -> int -> 'a -> 'b) -> 'b -> 'a t -> 'bfold_lefti f _ xs invokes f _ i x successively for every element x located at index i of the sequence xs.
An accumulator of type 'b is threaded through the calls to f.
It terminates only if the sequence xs is finite.
fold_lefti f accu xs is equivalent to fold_left (fun accu (i, x) -> f accu i x) accu (zip (ints 0) xs).
val for_all : ('a -> bool) -> 'a t -> boolfor_all p xs determines whether all elements x of the sequence xs satisfy p x.
The sequence xs must be finite.
val exists : ('a -> bool) -> 'a t -> boolexists xs p determines whether at least one element x of the sequence xs satisfies p x.
The sequence xs must be finite.
val find : ('a -> bool) -> 'a t -> 'a optionfind p xs returns Some x, where x is the first element of the sequence xs that satisfies p x, if there is such an element.
It returns None if there is no such element.
The sequence xs must be finite.
val find_map : ('a -> 'b option) -> 'a t -> 'b optionfind_map f xs returns Some y, where x is the first element of the sequence xs such that f x = Some _, if there is such an element, and where y is defined by f x = Some y.
It returns None if there is no such element.
The sequence xs must be finite.
iter2 f xs ys invokes f x y successively for every pair (x, y) of elements drawn synchronously from the sequences xs and ys.
If the sequences xs and ys have different lengths, then iteration stops as soon as one sequence is exhausted; the excess elements in the other sequence are ignored.
Iteration terminates only if at least one of the sequences xs and ys is finite.
iter2 f xs ys is equivalent to iter (fun (x, y) -> f x y) (zip xs ys).
fold_left2 f _ xs ys invokes f _ x y successively for every pair (x, y) of elements drawn synchronously from the sequences xs and ys.
An accumulator of type 'a is threaded through the calls to f.
If the sequences xs and ys have different lengths, then iteration stops as soon as one sequence is exhausted; the excess elements in the other sequence are ignored.
Iteration terminates only if at least one of the sequences xs and ys is finite.
fold_left2 f accu xs ys is equivalent to fold_left (fun accu (x, y) -> f accu x y) (zip xs ys).
for_all2 p xs ys determines whether all pairs (x, y) of elements drawn synchronously from the sequences xs and ys satisfy p x y.
If the sequences xs and ys have different lengths, then iteration stops as soon as one sequence is exhausted; the excess elements in the other sequence are ignored. In particular, if xs or ys is empty, then for_all2 p xs ys is true. This is where for_all2 and equal differ: equal eq xs ys can be true only if xs and ys have the same length.
At least one of the sequences xs and ys must be finite.
for_all2 p xs ys is equivalent to for_all (fun b -> b) (map2 p xs ys).
exists2 p xs ys determines whether some pair (x, y) of elements drawn synchronously from the sequences xs and ys satisfies p x y.
If the sequences xs and ys have different lengths, then iteration must stop as soon as one sequence is exhausted; the excess elements in the other sequence are ignored.
At least one of the sequences xs and ys must be finite.
exists2 p xs ys is equivalent to exists (fun b -> b) (map2 p xs ys).
Provided the function eq defines an equality on elements, equal eq xs ys determines whether the sequences xs and ys are pointwise equal.
At least one of the sequences xs and ys must be finite.
Provided the function cmp defines a preorder on elements, compare cmp xs ys compares the sequences xs and ys according to the lexicographic preorder.
For more details on comparison functions, see Array.sort.
At least one of the sequences xs and ys must be finite.
Constructing sequences
The functions in this section are lazy: that is, they return sequences whose elements are computed only when demanded.
val empty : 'a tempty is the empty sequence. It has no elements. Its length is 0.
val return : 'a -> 'a treturn x is the sequence whose sole element is x. Its length is 1.
cons x xs is the sequence that begins with the element x, followed with the sequence xs.
Writing cons (f()) xs causes the function call f() to take place immediately. For this call to be delayed until the sequence is queried, one must instead write (fun () -> Cons(f(), xs)).
val unfold : ('b -> ('a * 'b) option) -> 'b -> 'a tunfold constructs a sequence out of a step function and an initial state.
If f u is None then unfold f u is the empty sequence. If f u is Some (x, u') then unfold f u is the nonempty sequence cons x (unfold f u').
For example, unfold (function [] -> None | h :: t -> Some (h, t)) l is equivalent to List.to_seq l.
val repeat : 'a -> 'a trepeat x is the infinite sequence where the element x is repeated indefinitely.
repeat x is equivalent to cycle (return x).
val forever : (unit -> 'a) -> 'a tforever f is an infinite sequence where every element is produced (on demand) by the function call f().
For instance, forever Random.bool is an infinite sequence of random bits.
forever f is equivalent to map f (repeat ()).
cycle xs is the infinite sequence that consists of an infinite number of repetitions of the sequence xs.
If xs is an empty sequence, then cycle xs is empty as well.
Consuming (a prefix of) the sequence cycle xs once can cause the sequence xs to be consumed more than once. Therefore, xs must be persistent.
val iterate : ('a -> 'a) -> 'a -> 'a titerate f x is the infinite sequence whose elements are x, f x, f (f x), and so on.
In other words, it is the orbit of the function f, starting at x.
Transforming sequences
The functions in this section are lazy: that is, they return sequences whose elements are computed only when demanded.
map f xs is the image of the sequence xs through the transformation f.
If xs is the sequence x0; x1; ... then map f xs is the sequence f x0; f x1; ....
mapi is analogous to map, but applies the function f to an index and an element.
mapi f xs is equivalent to map2 f (ints 0) xs.
filter p xs is the sequence of the elements x of xs that satisfy p x.
In other words, filter p xs is the sequence xs, deprived of the elements x such that p x is false.
filter_map f xs is the sequence of the elements y such that f x = Some y, where x ranges over xs.
filter_map f xs is equivalent to map Option.get (filter Option.is_some (map f xs)).
If xs is a sequence [x0; x1; x2; ...], then scan f a0 xs is a sequence of accumulators [a0; a1; a2; ...] where a1 is f a0 x0, a2 is f a1 x1, and so on.
Thus, scan f a0 xs is conceptually related to fold_left f a0 xs. However, instead of performing an eager iteration and immediately returning the final accumulator, it returns a sequence of accumulators.
For instance, scan (+) 0 transforms a sequence of integers into the sequence of its partial sums.
If xs has length n then scan f a0 xs has length n+1.
take_while p xs is the longest prefix of the sequence xs where every element x satisfies p x.
drop_while p xs is the sequence xs, deprived of the prefix take_while p xs.
Provided the function eq defines an equality on elements, group eq xs is the sequence of the maximal runs of adjacent duplicate elements of the sequence xs.
Every element of group eq xs is a nonempty sequence of equal elements.
The concatenation concat (group eq xs) is equal to xs.
Consuming group eq xs, and consuming the sequences that it contains, can cause xs to be consumed more than once. Therefore, xs must be persistent.
The sequence memoize xs has the same elements as the sequence xs.
Regardless of whether xs is ephemeral or persistent, memoize xs is persistent: even if it is queried several times, xs is queried at most once.
The construction of the sequence memoize xs internally relies on suspensions provided by the module Lazy. These suspensions are not thread-safe. Therefore, the sequence memoize xs must not be queried by multiple threads concurrently.
This exception is raised when a sequence returned by once (or a suffix of it) is queried more than once.
The sequence once xs has the same elements as the sequence xs.
Regardless of whether xs is ephemeral or persistent, once xs is an ephemeral sequence: it can be queried at most once. If it (or a suffix of it) is queried more than once, then the exception Forced_twice is raised. This can be useful, while debugging or testing, to ensure that a sequence is consumed at most once.
If xss is a matrix (a sequence of rows), then transpose xss is the sequence of the columns of the matrix xss.
The rows of the matrix xss are not required to have the same length.
The matrix xss is not required to be finite (in either direction).
The matrix xss must be persistent.
Combining sequences
append xs ys is the concatenation of the sequences xs and ys.
Its elements are the elements of xs, followed by the elements of ys.
If xss is a sequence of sequences, then concat xss is its concatenation.
If xss is the sequence xs0; xs1; ... then concat xss is the sequence xs0 @ xs1 @ ....
concat_map f xs is equivalent to concat (map f xs).
concat_map is an alias for flat_map.
zip xs ys is the sequence of pairs (x, y) drawn synchronously from the sequences xs and ys.
If the sequences xs and ys have different lengths, then the sequence ends as soon as one sequence is exhausted; the excess elements in the other sequence are ignored.
zip xs ys is equivalent to map2 (fun a b -> (a, b)) xs ys.
map2 f xs ys is the sequence of the elements f x y, where the pairs (x, y) are drawn synchronously from the sequences xs and ys.
If the sequences xs and ys have different lengths, then the sequence ends as soon as one sequence is exhausted; the excess elements in the other sequence are ignored.
map2 f xs ys is equivalent to map (fun (x, y) -> f x y) (zip xs ys).
interleave xs ys is the sequence that begins with the first element of xs, continues with the first element of ys, and so on.
When one of the sequences xs and ys is exhausted, interleave xs ys continues with the rest of the other sequence.
If the sequences xs and ys are sorted according to the total preorder cmp, then sorted_merge cmp xs ys is the sorted sequence obtained by merging the sequences xs and ys.
For more details on comparison functions, see Array.sort.
product xs ys is the Cartesian product of the sequences xs and ys.
For every element x of xs and for every element y of ys, the pair (x, y) appears once as an element of product xs ys.
The order in which the pairs appear is unspecified.
The sequences xs and ys are not required to be finite.
The sequences xs and ys must be persistent.
The sequence map_product f xs ys is the image through f of the Cartesian product of the sequences xs and ys.
For every element x of xs and for every element y of ys, the element f x y appears once as an element of map_product f xs ys.
The order in which these elements appear is unspecified.
The sequences xs and ys are not required to be finite.
The sequences xs and ys must be persistent.
map_product f xs ys is equivalent to map (fun (x, y) -> f x y) (product xs ys).
Splitting a sequence into two sequences
unzip transforms a sequence of pairs into a pair of sequences.
unzip xs is equivalent to (map fst xs, map snd xs).
Querying either of the sequences returned by unzip xs causes xs to be queried. Therefore, querying both of them causes xs to be queried twice. Thus, xs must be persistent and cheap. If that is not the case, use unzip (memoize xs).
partition_map f xs returns a pair of sequences (ys, zs), where:
ysis the sequence of the elementsysuch thatf x = Left y, wherexranges overxs;
zsis the sequence of the elementszsuch thatf x = Right z, wherexranges overxs.
partition_map f xs is equivalent to a pair of filter_map Either.find_left (map f xs) and filter_map Either.find_right (map f xs).
Querying either of the sequences returned by partition_map f xs causes xs to be queried. Therefore, querying both of them causes xs to be queried twice. Thus, xs must be persistent and cheap. If that is not the case, use partition_map f (memoize xs).
partition p xs returns a pair of the subsequence of the elements of xs that satisfy p and the subsequence of the elements of xs that do not satisfy p.
partition p xs is equivalent to filter p xs, filter (fun x -> not (p x)) xs.
Consuming both of the sequences returned by partition p xs causes xs to be consumed twice and causes the function f to be applied twice to each element of the list. Therefore, f should be pure and cheap. Furthermore, xs should be persistent and cheap. If that is not the case, use partition p (memoize xs).
Converting between sequences and dispensers
A dispenser is a representation of a sequence as a function of type unit -> 'a option. Every time this function is invoked, it returns the next element of the sequence. When there are no more elements, it returns None. A dispenser has mutable internal state, therefore is ephemeral: the sequence that it represents can be consumed at most once.
val of_dispenser : (unit -> 'a option) -> 'a tof_dispenser it is the sequence of the elements produced by the dispenser it. It is an ephemeral sequence: it can be consumed at most once. If a persistent sequence is needed, use memoize (of_dispenser it).
val to_dispenser : 'a t -> unit -> 'a optionto_dispenser xs is a fresh dispenser on the sequence xs.
This dispenser has mutable internal state, which is not protected by a lock; so, it must not be used by several threads concurrently.
Sequences of integers
val ints : int -> int tints i is the infinite sequence of the integers beginning at i and counting up.
Lwtreslib-specific safety-shadowing
Lwtreslib-specific extensions
Similar to iter2 but wraps the iteration in Lwt. All the steps of the iteration are started concurrently. The promise iter2_p f s1 s2 resolves once all the promises of the traversal resolve. At this point it is either:
- rejected if at least one of the promises is,
- fulfilled with
()if all of the promises are.
Note that similarly to Stdlib.Seq.iter2 this function iterates on the common-length prefix of the two sequences. As a result, the iteration can be successful even if the two sequences are of different lengths.
val iter_ep :
('a -> (unit, 'error Trace.trace) result Lwt.t) ->
'a t ->
(unit, 'error Trace.trace) result Lwt.tSimilar to iter but wraps the iteration in result Lwt.t. All the steps of the iteration are started concurrently. The promise iter_ep resolves once all the promises of the traversal resolve. At this point it either:
- is rejected if at least one of the promises is, otherwise
- is fulfilled with
Error _if at least one of the promises is, otherwise - is fulfilled with
Ok ()if all the promises are.
val iteri_ep :
(int -> 'a -> (unit, 'error Trace.trace) result Lwt.t) ->
'a t ->
(unit, 'error Trace.trace) result Lwt.tSimilar to iteri but wraps the iteration in result Lwt.t. All the steps of the iteration are started concurrently. The promise iteri_ep resolves once all the promises of the traversal resolve. At this point it either:
- is rejected if at least one of the promises is, otherwise
- is fulfilled with
Error _if at least one of the promises is, otherwise - is fulfilled with
Ok ()if all the promises are.
val iter2_ep :
('a -> 'b -> (unit, 'error Trace.trace) result Lwt.t) ->
'a t ->
'b t ->
(unit, 'error Trace.trace) result Lwt.tSimilar to iter2 but wraps the iteration in result Lwt.t. All the steps of the iteration are started concurrently. The promise iter2_ep resolves once all the promises of the traversal resolve. At this point it either:
- is rejected if at least one of the promises is, otherwise
- is fulfilled with
Error _if at least one of the promises is, otherwise - is fulfilled with
Ok ()if all the promises are.
Following the behaviour of the Stdlib, the two-sequence traversors stop as soon as one of the two sequences ends: the suffix of the longer sequence is ignored.