package accessor

  1. Overview
  2. Docs
Legend:
Library
Module
Module type
Parameter
Class
Class type

An "accessor" describes how to access some data within a larger data structure. See the tutorial in doc/tutorial.mlt for an overview.

Types

module General : sig ... end
type ('index, 'inner, 'outer, 'kind) t = ('index -> 'inner -> 'inner, 'index -> 'outer -> 'outer, 'kind) General.t

Accessors are commonly not indexed and don't need to support polymorphic updates. In such cases, it may be easier to read and write types in terms of t instead of General.t. Here is an example where the improvement by using t is significant:

val date_ofday
  :  Time.Zone.t
  -> ( 'i -> Date.t * Time.Ofday.t -> Date.t * Time.Ofday.t
     , 'i -> Time.t -> Time.t
     , [< isomorphism] )
       Accessor.General.t

It is more cleanly written like this:

val date_ofday
  :  Time.Zone.t
  -> (_, Date.t * Time.Ofday.t, Time.t, [< isomorphism]) Accessor.t
module O : sig ... end

To use Accessor in your own code, it is recommended to add the following to your import.ml:

To use Accessor in your own code, it is recommended to add the following to your import.ml:

module Accessor =
  (* Consider using something like [Accessor_base], [Accessor_core], or
     [Accessor_async], instead. *)
  Accessor

include Accessor.O

The O module contains a few operators and type aliases that are unlikely to clash with anything else.

type constructor = [
  1. | `construct
]
type equality = [
  1. | `get
  2. | `map
  3. | `at_most_one
  4. | `at_least_one
  5. | `construct
  6. | `coerce
]
type field = [
  1. | `get
  2. | `map
  3. | `at_most_one
  4. | `at_least_one
]
type getter = [
  1. | `get
  2. | `at_least_one
  3. | `at_most_one
]
type isomorphism = [
  1. | `get
  2. | `map
  3. | `at_most_one
  4. | `at_least_one
  5. | `construct
]
type many = [
  1. | `get
  2. | `map
]
type many_getter = [
  1. | `get
]
type mapper = [
  1. | `map
]
type nonempty = [
  1. | `get
  2. | `map
  3. | `at_least_one
]
type nonempty_getter = [
  1. | `get
  2. | `at_least_one
]
type optional = [
  1. | `get
  2. | `map
  3. | `at_most_one
]
type optional_getter = [
  1. | `get
  2. | `at_most_one
]
type variant = [
  1. | `get
  2. | `map
  3. | `at_most_one
  4. | `construct
]
val (@>) : ('middle, 'outer, 'kind) General.t -> ('inner, 'middle, 'kind) General.t -> ('inner, 'outer, 'kind) General.t

a @> b is the composition of the two accessors a and b. From left to right, a chain of composed accessors goes from outermost to innermost values. The resulting accessor kind is determined by the least powerful argument. Here are a few examples:

  • An isomorphism composed with a field is a field.
  • A field composed with a variant is an optional.
  • A getter composed with a variant is an optional_getter.

It's normally more intuitive to think of the operations you need than to think of exactly which kind of accessor you are creating. For example, if you are trying to extract a value from a data structure using a field, you would probably use get. However, if you compose the field with an optional, get no longer makes sense; you must use something like get_option, instead.

The non-operator name is Accessor.compose.

val (.@()) : 'at -> (Base.unit -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> getter ]) General.t -> 'a

x.@(t) extracts a single value from x as identified by t. The non-operator name is Accessor.get.

val (.@?()) : 'at -> (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> optional_getter ]) General.t -> 'a Base.option

x.@?(t) extracts at most one value from x as identified by t. The non-operator name is Accessor.get_option.

val (.@*()) : 'at -> (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'a Base.list

x.@*(t) extracts any number of values from x as identified by t. The non-operator name is Accessor.to_list.

val (.@()<-) : 'at -> (_ -> _ -> 'b, Base.unit -> 'at -> 'bt, [> mapper ]) General.t -> 'b -> 'bt

x.@(t) <- y replaces any number of values in x with y, as identified by t. The non-operator name is Accessor.set.

val id : ('a, 'a, _) General.t

id can be used as any kind of accessor. It is also the only way to summon an equality.

val compose : ('middle, 'outer, 'kind) General.t -> ('inner, 'middle, 'kind) General.t -> ('inner, 'outer, 'kind) General.t

compose is the same as ( @> ). See the documentation of ( @> ) for more information.

val dummy : (_, _, _, [< optional ]) t

dummy is an accessor of a value that is never present. get_option dummy will always return None, and map dummy is always a no-op.

Using accessors

Indices

module Index : sig ... end

An Index.t is a heterogeneous stack of values intended to serve as "breadcrumbs" that show how you got to some value currently being accessed inside a composite data structure. For example, if on the way in you traversed a Map.t, one component of the index might be the key of the data being accessed.

module Indexed : sig ... end
module Subtyping : sig ... end

The Subtyping module contains all the types used for accessor subtyping. You shouldn't have to use it, but it's here for the documentation.

Functions

Getting and Folding

val get : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> getter ]) General.t -> 'at -> 'a

get t at reads a value from at.

val geti : ('i -> 'a -> _, Base.unit -> 'at -> _, [> getter ]) General.t -> 'at -> 'i Index.t * 'a

geti t at reads a value and its index from at.

val get_option : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> optional_getter ]) General.t -> 'at -> 'a Base.option

get_option t at reads a value from at, if present.

val get_optioni : ('i -> 'a -> _, Base.unit -> 'at -> _, [> optional_getter ]) General.t -> 'at -> ('i Index.t * 'a) Base.option

get_optioni t at reads a value and its index from at, if present.

val match_ : (Base.unit -> 'a -> _, Base.unit -> 'at -> 'bt, [> optional ]) General.t -> 'at -> ('a, 'bt) Base.Either.t

match_ t at is like get_option, but in the failure case it may be able to give you the input data structure with a different type.

val matchi : ('i -> 'a -> _, Base.unit -> 'at -> 'bt, [> optional ]) General.t -> 'at -> ('i Index.t * 'a, 'bt) Base.Either.t

An indexed version of match_.

val to_list : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> 'a Base.list

Extract all the values targetted by an accessor in some composite data structure into a list.

val to_listi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> ('i Index.t * 'a) Base.list

An indexed version of to_list.

val to_array : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> 'a Base.array

Extract all the values targetted by an accessor in some composite data structure into an array.

val to_arrayi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> ('i Index.t * 'a) Base.array

An indexed version of to_array.

val fold : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> init:'acc -> f:('acc -> 'a -> 'acc) -> 'acc

Fold across all the values targetted by an accessor with an accumulator.

val foldi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> init:'acc -> f:('i Index.t -> 'acc -> 'a -> 'acc) -> 'acc

Indexed version of fold.

val iter : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('a -> Base.unit) -> Base.unit

Iterate over all the values targetted by an accessor, applying the function argument to each one.

val iteri : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('i Index.t -> 'a -> Base.unit) -> Base.unit

An indexed version of iter.

val length : (Base.unit -> _ -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> Base.int

length t at returns the number of targets in at.

val is_empty : (Base.unit -> _ -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> Base.bool

is_empty t at is true iff there are no targets in at.

val sum : (module Base.Container.Summable with type t = 'sum) -> (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('a -> 'sum) -> 'sum

sum (module Summable) t at ~f returns the sum of f a for all targets a in at.

val sumi : (module Base.Container.Summable with type t = 'sum) -> ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('i Index.t -> 'a -> 'sum) -> 'sum

sumi is the indexed version of sum.

val count : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('a -> Base.bool) -> Base.int

count t at ~f returns the number of targets in at for which f evaluates to true.

val counti : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('i Index.t -> 'a -> Base.bool) -> Base.int

counti is the indexed version of count.

val exists : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('a -> Base.bool) -> Base.bool

exists t at ~f returns true iff there is a target in at for which f returns true. This is a short-circuiting operation.

val existsi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('i Index.t -> 'a -> Base.bool) -> Base.bool

existsi is the indexed version of exists.

val for_all : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('a -> Base.bool) -> Base.bool

for_all t at ~f returns true iff f returns true for all targets in at. This is a short-circuiting operation.

val for_alli : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('i Index.t -> 'a -> Base.bool) -> Base.bool

for_alli is the indexed version of for_all.

val find_map : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('a -> 'b Base.option) -> 'b Base.option

find_map returns the first evaluation of f that returns Some.

val find_mapi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('i Index.t -> 'a -> 'b Base.option) -> 'b Base.option

find_mapi is the indexed version of find_map.

val find : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('a -> Base.bool) -> 'a Base.option

find t at ~f returns the first target in at for which the evaluation of f returns true.

val findi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> f:('i Index.t -> 'a -> Base.bool) -> ('i Index.t * 'a) Base.option

findi is the indexed version of find.

val min_elt : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> nonempty_getter ]) General.t -> 'at -> compare:('a -> 'a -> Base.int) -> 'a

min_elt t at ~compare uses compare to compare each target in at and returns the first target with the smallest value.

val min_elt_option : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> compare:('a -> 'a -> Base.int) -> 'a Base.option

min_elt_option t at ~compare uses compare to compare each target in at and returns the first target with the smallest value, if any.

val max_elt : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> nonempty_getter ]) General.t -> 'at -> compare:('a -> 'a -> Base.int) -> 'a

max_elt t at ~compare uses compare to compare each target in at and returns the first target with the largest value.

val max_elt_option : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> compare:('a -> 'a -> Base.int) -> 'a Base.option

max_elt_option t at ~compare uses compare to compare each target in at and returns the first target with the largest value, if any.

val hd : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> nonempty_getter ]) General.t -> 'at -> 'a

hd t at returns the first targetted element of at.

val hdi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> nonempty_getter ]) General.t -> 'at -> 'i Index.t * 'a

An indexed version of hd.

val hd_option : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> 'a Base.option

hd_option t at returns the first targetted element of at, if any.

val hd_optioni : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> ('i Index.t * 'a) Base.option

An indexed version of hd_option.

val map_reduce : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> empty:'r -> combine:('r -> 'r -> 'r) -> f:('a -> 'r) -> 'r

map_reduce t at ~empty ~combine ~f applies f to each targetted value in at and combines the results using combine. The result is empty if there were no values. empty and combine are expected to satisfy the following properties:

  • combine empty a = a
  • combine a empty = a
  • combine (combine a b) c = combine a (combine b c)
val map_reducei : ('i -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> empty:'r -> combine:('r -> 'r -> 'r) -> f:('i Index.t -> 'a -> 'r) -> 'r

An indexed version of map_reduce.

val reduce : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> many_getter ]) General.t -> 'at -> empty:'a -> combine:('a -> 'a -> 'a) -> 'a

reduce t at ~empty ~combine combines all accessed values in at using combine. The result is empty if there were no values accessed. empty and combine are expected to satisfy the following properties:

  • combine empty a = a
  • combine a empty = a
  • combine (combine a b) c = combine a (combine b c)
val map_reduce_nonempty : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> nonempty_getter ]) General.t -> 'at -> combine:('r -> 'r -> 'r) -> f:('a -> 'r) -> 'r

map_reduce_nonempty t at ~combine ~f applies f to each targetted value in at and combines the results using combine. combine is expected to satisfy the property: combine (combine a b) c = combine a (combine b c).

val map_reduce_nonemptyi : ('i -> 'a -> _, Base.unit -> 'at -> _, [> nonempty_getter ]) General.t -> 'at -> combine:('r -> 'r -> 'r) -> f:('i Index.t -> 'a -> 'r) -> 'r

An indexed version of map_reduce_nonempty.

val reduce_nonempty : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> nonempty_getter ]) General.t -> 'at -> combine:('a -> 'a -> 'a) -> 'a

reduce_nonempty t at ~combine combines all accessed values in at using combine. combine is expected to satisfy the property: combine (combine a b) c = combine a (combine b c).

Modifying

val map : (Base.unit -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> mapper ]) General.t -> 'at -> f:('a -> 'b) -> 'bt

map t at ~f applies f to each targetted value inside at, replacing it with the result.

val mapi : ('i -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> mapper ]) General.t -> 'at -> f:('i Index.t -> 'a -> 'b) -> 'bt

mapi is the indexed version of map.

val folding_map : (Base.unit -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> many ]) General.t -> 'at -> init:'acc -> f:('acc -> 'a -> 'acc * 'b) -> 'bt

folding_map is a version of map that threads an accumulator through calls to f.

val folding_mapi : ('i -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> many ]) General.t -> 'at -> init:'acc -> f:('i Index.t -> 'acc -> 'a -> 'acc * 'b) -> 'bt

folding_mapi is the indexed version of folding_map.

val fold_map : (Base.unit -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> many ]) General.t -> 'at -> init:'acc -> f:('acc -> 'a -> 'acc * 'b) -> 'acc * 'bt

fold_map is a combination of fold and map that threads an accumulator through calls to f.

val fold_mapi : ('i -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> many ]) General.t -> 'at -> init:'acc -> f:('i Index.t -> 'acc -> 'a -> 'acc * 'b) -> 'acc * 'bt

fold_mapi is the indexed version of fold_map.

val set : (_ -> _ -> 'b, Base.unit -> 'at -> 'bt, [> mapper ]) General.t -> 'at -> to_:'b -> 'bt

set t at ~to_ replaces targetted values inside at with to_.

Monadic and Applicative functions

Signatures

There are a number of signatures and functors in this section, all for the purpose of providing a wide variety of applicative/monadic functionality.

module Functor : sig ... end
module Applicative : sig ... end
module Applicative_without_return : sig ... end
module Monad : sig ... end

The monad signatures differ from the applicative ones in that some of the functions have an optional how argument. They always default to `Sequential, which is the behavior that interleaves side effects with monadic effects. If you override this argument to `Parallel then all the side effects are performed up front, and then the results are combined.

module Monad_without_return : sig ... end
Functors
module Of_functor (F : sig ... end) : Functor.S with type 'a t := 'a F.t

Of_functor, Of_functor2, and Of_functor3 generate map-like functions that work under some "functor", which is like a monad or applicative, except that it only supports map.

module Of_functor2 (F : sig ... end) : Functor.S2 with type ('a, 'd) t := ('a, 'd) F.t
module Of_functor3 (F : sig ... end) : Functor.S3 with type ('a, 'd, 'e) t := ('a, 'd, 'e) F.t
module Of_applicative (A : sig ... end) : Applicative.S with type 'a t := 'a A.t

Of_applicative and Of_applicative2 can be used to generate map-like functions that can use applicative effects. See also Of_monad, which gives more control over the relationship between side effects and monadic effects.

module Of_applicative2 (A : sig ... end) : Applicative.S2 with type ('a, 'e) t := ('a, 'e) A.t

See Of_applicative.

module Of_applicative3 (A : sig ... end) : Applicative.S3 with type ('a, 'd, 'e) t := ('a, 'd, 'e) A.t

See Of_applicative.

module Of_monad (M : sig ... end) : Monad.S with type 'a t := 'a M.t

Of_monad is similar to Of_applicative. There are two differences.

module Of_monad2 (M : sig ... end) : Monad.S2 with type ('a, 'e) t := ('a, 'e) M.t

See Of_monad.

module Of_monad3 (M : sig ... end) : Monad.S3 with type ('a, 'd, 'e) t := ('a, 'd, 'e) M.t

See Of_monad.

module Of_applicative_without_return (A : sig ... end) : Applicative_without_return.S with type 'a t := 'a A.t

Like Of_applicative, but without return.

module Of_applicative_without_return2 (A : sig ... end) : Applicative_without_return.S2 with type ('a, 'e) t := ('a, 'e) A.t

Like Of_applicative2, but without return.

module Of_applicative_without_return3 (A : sig ... end) : Applicative_without_return.S3 with type ('a, 'd, 'e) t := ('a, 'd, 'e) A.t
module Of_monad_without_return (A : sig ... end) : Monad_without_return.S with type 'a t := 'a A.t

Like Of_monad, but without return.

module Of_monad_without_return2 (A : sig ... end) : Monad_without_return.S2 with type ('a, 'e) t := ('a, 'e) A.t

Like Of_monad2, but without return.

module Of_monad_without_return3 (A : sig ... end) : Monad_without_return.S3 with type ('a, 'd, 'e) t := ('a, 'd, 'e) A.t

Recursive update

val transform : (Base.unit -> 'a -> 'b, Base.unit -> 'a -> 'b, [> mapper ]) General.t -> 'a -> f:('b -> 'b) -> 'b

transform t a ~f applies f everywhere it can inside of a once. It operates from the bottom up in one pass. t is used to find the children at each level, where the children are expected to have the same type as their parent.

val rewrite : (Base.unit -> 'a -> 'b, Base.unit -> 'a -> 'b, [> mapper ]) General.t -> 'a -> f:('b -> 'a Base.option) -> 'b

rewrite t a ~f applies the rewrite rule f everywhere it can inside of a until it cannot be applied anywhere else. It operates from the bottom up, retrying subtrees each time a rule is applied successfully. t is used to find the children at each level, where the children are expected to have the same type as their parent.

Type equality

module Identical : sig ... end

An Identical.t is similar to a Type_equal.t, but it relates two pairs of types with each other instead of merely two types. It is a more natural way of using an equality accessor than Type_equal.t would be, since you only need to match on one constructor.

val identical : (Base.unit -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> equality ]) General.t -> ('a, 'b, 'at, 'bt) Identical.t

An equality is more powerful even than an isomorphism. It can be used to prove that the types are equal using the identical function.

Construction

val construct : (_ -> _ -> 'b, _ -> _ -> 'bt, [> constructor ]) General.t -> 'b -> 'bt

construct goes the opposite way to most access patterns. It allows you to construct a composite data structure without reading from one.

Custom mappings

Accessors transform a mapping over inner data to a mapping over outer data. You can use accessors to transform your own mapping types by using the functors in this section. Here is an example of using Mapper.Make to define functions equivalent to Accessor.map and Accessor.mapi:

include Mapper.Make (struct
    type ('a, 'b) t = 'a -> 'b

    let mapper map t at = map at ~f:t
  end)

let mapi t at ~f = access t (fun (i, a) -> f i a) ([], at)

let map t at ~f = mapi t at ~f:(fun [] a -> f a)
module Equality : sig ... end

An equality can transform any mapping. There is no need for you to provide any functionality of your own.

module Isomorphism : sig ... end
module Field : sig ... end
module Variant : sig ... end
module Constructor : sig ... end
module Getter : sig ... end
module Optional : sig ... end
module Optional_getter : sig ... end
module Nonempty : sig ... end
module Nonempty_getter : sig ... end
module Many : sig ... end
module Many_getter : sig ... end
module Mapper : sig ... end

Creating accessors

Avoiding the value restriction

The value restriction will apply frequently to accessors you define. Unfortunately, even if you are not defining an accessor supporting polymorphic update, polymorphism is still critical for the normal type checking of accessors, because without it there could be no subtyping. Accessor addresses this problem by exposing its representation as a function and offering a syntax extension, as part of ppx_accessor, to eta expand the definition for you. The upshot is that you can define accessors like this and not think about the value restriction anymore:

let foo =
  [%accessor
    Accessor.field ~get:(fun t -> t.foo) ~set:(fun t foo -> { t with foo })]

Deriving accessors

ppx_accessor adds the ability to derive accessors given a type definition. See the ppx_accessor README for more information.

"Well behaved" accessors

Many of the functions for creating accessors are documented with conditions that are necessary for an accessor to be "well behaved". For most accessors, these conditions are sufficiently restrictive that the type parameters are not quite freely independent of each other.

The properties generally make intuitive sense, but it can still be useful sometimes to define an accessor that is not always well behaved. Even Accessor itself defines a few badly behaved accessors. If you define an accessor that isn't well behaved, it is recommended that you document the conditions under which it is not well behaved.

Creation functions

Field accessors

val field : get:('at -> 'a) -> set:('at -> 'b -> 'bt) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< field ]) General.t

field ~get ~set creates a field accessor. A field accesses exactly one value within a composite data structure. For the field to be well behaved, get and set should satisfy the following properties:

  • get (set at a) = a
  • set at (get at) = at
  • set (set at a) b = set at b
val field' : ('at -> 'a * ('b -> 'bt)) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< field ]) General.t

field' is the same as field, just with a slightly different interface. field is usually more convenient to use, but field' can be useful to allow get and set to share the computation of finding the location to modify.

val of_field : ([> `Set_and_create ], 'r, 'a) Base.Field.t_with_perm -> ('i -> 'a -> 'a, 'i -> 'r -> 'r, [< field ]) General.t

A Field.t is sufficient to define a field accessor, but the resulting accessor might not be as polymorphic as it could have been if defined by hand or using @@deriving accessor.

val fieldi : get:('at -> 'i * 'a) -> set:('at -> 'b -> 'bt) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< field ]) General.t

fieldi is the indexed version of field.

val fieldi' : ('at -> 'i * 'a * ('b -> 'bt)) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< field ]) General.t

fieldi' is the indexed version of field'.

val of_fieldi : ([> `Set_and_create ], 'r, 'a) Base.Field.t_with_perm -> ((Base.string * 'it) -> 'a -> 'a, 'it -> 'r -> 'r, [< field ]) General.t

A Field.t is sufficient to define an indexed field accessor, where the index is the name of the field as a string. The resulting accessor might not be as polymorphic as it could have been if defined by hand or using @@deriving accessor.

Variant accessors

val variant : match_:('at -> ('a, 'bt) Base.Either.t) -> construct:('b -> 'bt) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< variant ]) General.t

variant ~match_ ~construct creates a variant accessor. A variant accesses at most one value within a composite data structure, and if it does access a value then that value is representative of the entire data structure. A well behaved variant should satisfy the following properties:

  • match_ (construct a) = First a
  • if match_ at = First a then construct a = at
  • if match_ at = Second bt then at = bt
val varianti : match_:('at -> ('i * 'a, 'bt) Base.Either.t) -> construct:('b -> 'bt) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< variant ]) General.t

varianti is the indexed version of variant.

Optional accessors

val optional : match_:('at -> ('a, 'bt) Base.Either.t) -> set:('at -> 'b -> 'bt) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< optional ]) General.t

optional ~match_ ~set creates an optional accessor. An optional accesses at most one value within a composite data structure. A well behaved optional should satisfy the following properties:

  • match_ (set at a) = Either.First.map (match_ at) ~f:(const a)
  • if match_ at = First a then set at a = at
  • if match_ at = Second bt then at = bt and set at b = at
  • set (set at a) b = set at b
val optional' : ('at -> ('a * ('b -> 'bt), 'bt) Base.Either.t) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< optional ]) General.t

optional' is the same as optional, just with a slightly different interface. optional is usually more convenient to use, but optional' can be useful to allow match_ and set to share the computation of finding the location to modify.

val optionali : match_:('at -> ('i * 'a, 'bt) Base.Either.t) -> set:('at -> 'b -> 'bt) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< optional ]) General.t

optionali is the indexed version of optional.

val optionali' : ('at -> ('i * 'a * ('b -> 'bt), 'bt) Base.Either.t) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< optional ]) General.t

optionali' is the indexed version of optional'.

val filter_index : ('i Index.t -> Base.bool) -> ('i -> 'a -> 'a, 'i -> 'a -> 'a, [< optional ]) General.t

filter_index predicate accesses the entire value if its index satisfies predicate, otherwise it accesses nothing. Compose it with a many accessor to access a subset of values.

val filter_map_index : ('i Index.t -> 'j Index.t Base.option) -> ('j -> 'a -> 'a, 'i -> 'a -> 'a, [< optional ]) General.t

filter_map_index f is like filter_index, but it can also modify the indices.

Isomorphism accessors

val isomorphism : get:('at -> 'a) -> construct:('b -> 'bt) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< isomorphism ]) General.t

isomorphism ~get ~construct creates an isomorphism accessor. An isomorphism accesses exactly one value which exactly represents the entire data structure. A well behaved isomorphism should satisfy the following properties:

  • get (construct b) = b
  • construct (get at) = at
val isomorphismi : get:('at -> 'i * 'a) -> construct:('b -> 'bt) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< isomorphism ]) General.t

isomorphismi is the indexed version of isomorphism.

val map_index : ('i Index.t -> 'j Index.t) -> ('j -> 'a -> 'b, 'i -> 'a -> 'b, [< isomorphism ]) General.t

map_index f applies f to the the indices that pass through it in a chain of composed accessors.

val add_to_index : (('a * 'i) -> 'a -> 'b, 'i -> 'a -> 'b, [< isomorphism ]) General.t

add_to_index adds the value to index without making any changes to the value. It's useful for marking the current value before doing further transformations. It's equivalent to isomorphismi ~get:(fun x -> x, x) ~construct:Fn.id.

Mapper accessors

val mapper : ('at -> f:('a -> 'b) -> 'bt) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< mapper ]) General.t

mapper map creates a mapper accessor. A mapper can modify values inside a composite data structure, but cannot read anything out. A well behaved mapper should satisfy the following properties:

  • map at ~f:Fn.id = at
  • map at ~f:(Fn.compose f g) = map (map at ~f:g) ~f
val mapperi : ('at -> f:('i -> 'a -> 'b) -> 'bt) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< mapper ]) General.t

mapperi is the indexed version of mapper.

Many accessors

val many : ('at -> ('bt, 'a, 'b) Many.t) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< many ]) General.t

many traverse creates a many accessor. A many accesses any number of values within a composite data structure.

To define a many accessor, you must use Accessor.Many.t, which is an applicative. You should traverse the data structure as necessary, and each time you reach a value that should be accessed, apply Accessor.Many.access to it.

Here is an example of using many to define an accessor that reaches all the elements of a list:

Accessor.many (fun at -> Accessor.Many.all (List.map at ~f:Accessor.Many.access))

A well behaved many should satisfy the same properties as a well behaved mapper, but generalized for an applicative setting. The properties themselves are uselessly complicated when written out, but here they are anyway. A and B are assumed to have the of_many function generated by Many.Of_applicative, and Compose is assumed to be some functor behaving like Applicative.Compose that also uses Many.Of_applicative to generate an of_many function.

  • A.of_many (traverse at) ~access:A.return = A.return at
  • Compose(A)(B).of_many (traverse at) ~access:(fun a -> A.map (g a) ~f)
    = A.map (A.of_many (traverse at) ~access:g) ~f:(fun at ->
      B.of_many (traverse at) ~access:f)
val manyi : ('at -> ('bt, 'i * 'a, 'b) Many.t) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< many ]) General.t

manyi is the indexed version of many.

Nonempty accessors

Nonempty accessors are defined very similarly to how many accessors are defined. The only difference is that you should use Accessor.Nonempty instead of Accessor.Many. The practical difference between the two is that Accessor.Nonempty does not have a return function.

val nonempty : ('at -> ('bt, 'a, 'b) Nonempty.t) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< nonempty ]) General.t

nonempty traverse creates a nonempty accessor. A nonempty accesses a nonzero number of values within a composite data structure.

To define a nonempty accessor, you must use Accessor.Nonempty.t, which is an applicative lacking return. You should traverse the data structure as necessary, and each time you reach a value that should be accessed, apply Accessor.Nonempty.access to it.

Here is an example of using nonempty to define an accessor that reaches both components of a tuple:

Accessor.nonempty (fun (a, b) ->
  let open Accessor.Nonempty.Let_syntax in
  let%map_open a = access a
  and b = access b in
  a, b)

A well behaved nonempty should satisfy the second property of a well behaved mapper, but generalized for an applicative setting. The property itself is uselessly complicated when written out, but here it is anyway. A and B are assumed to have the of_nonempty function generated by Nonempty.Of_applicative_without_return, and Compose is assumed to be some functor behaving like Applicative_without_return.Compose that also uses Nonempty.Of_applicative_without_return to generate an of_nonempty function.

Compose(A)(B).of_nonempty (traverse at) ~access:(fun a -> A.map (g a) ~f)
= A.map (A.of_nonempty (traverse at) ~access:g) ~f:(fun at ->
  B.of_nonempty (traverse at) ~access:f)
val nonemptyi : ('at -> ('bt, 'i * 'a, 'b) Nonempty.t) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< nonempty ]) General.t

nonemptyi is the indexed version of nonempty.

Getter accessors

val getter : ('at -> 'a) -> ('i -> 'a -> _, 'i -> 'at -> _, [< getter ]) General.t

getter get creates a getter accessor. A getter reads exactly one value from a composite data structure. There are no properties necessary for a getter to be well behaved.

val getteri : ('at -> 'i * 'a) -> (('i * 'it) -> 'a -> _, 'it -> 'at -> _, [< getter ]) General.t

getteri is the indexed version of getter.

Optional getter accessors

val optional_getter : ('at -> 'a Base.option) -> ('i -> 'a -> _, 'i -> 'at -> _, [< optional_getter ]) General.t

optional_getter get creates an optional getter accessor. An optional getter reads at most one value from a composite data structure. There are no properties necessary for an optional getter to be well behaved.

val optional_getteri : ('at -> ('i * 'a) Base.option) -> (('i * 'it) -> 'a -> _, 'it -> 'at -> _, [< optional_getter ]) General.t

optional_getteri is the indexed version of optional_getter.

Many getter accessors

val many_getter : ('at -> 'a Many_getter.t) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< many_getter ]) General.t

many_getter map_reduce creates a many_getter accessor. A many getter reads any number of values from a composite data structure. There are no properties necessary for a many getter to be well behaved.

To define a many_getter, you must use the Many_getter interface. Like Many, it has an access function to designate which values to access. Unlike Many, instead of an applicative interface, it has empty and append (or ( @ )) functions.

Here is an example of defining a getter that reads all the elements of a list:

Accessor.many_getter (fun at ->
  Accessor.Many_getter.of_list (List.map at ~f:Accessor.Many_getter.access))
val many_getteri : ('at -> ('i * 'a) Many_getter.t) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< many_getter ]) General.t

many_getteri is the indexed version of many_getter.

Nonempty getter accessors

Nonempty getter accessors are defined very similarly to how many getter accessors are defined. The only difference is that it uses Nonempty_getter instead of Many_getter. Nonempty_getter does not have empty.

val nonempty_getter : ('at -> 'a Nonempty_getter.t) -> ('i -> 'a -> 'b, 'i -> 'at -> 'bt, [< nonempty_getter ]) General.t

nonempty_getter map_reduce creates a nonempty getter accessor. A nonempty getter reads at least one value from a composite data structure. There are no properties necessary for a nonempty getter to be well behaved.

To define a nonempty_getter, you must use the Nonempty_getter interface. Like Nonempty, it has an access function to designate which values to access. Unlike Nonempty, instead of an applicative style interface, it has an append (or ( @ )) function.

Here is an example of defining a getter that reads both of the components of a tuple:

Accessor.nonempty_getter (fun (a, b) ->
  Accessor.Nonempty_getter.(access a @ access b))
val nonempty_getteri : ('at -> ('i * 'a) Nonempty_getter.t) -> (('i * 'it) -> 'a -> 'b, 'it -> 'at -> 'bt, [< nonempty_getter ]) General.t

nonempty_getteri is the indexed version of nonempty_getter.

Constructor accessors

val constructor : ('b -> 'bt) -> (_ -> _ -> 'b, _ -> _ -> 'bt, [< constructor ]) General.t

constructor construct creates a constructor accessor. A constructor creates a composite data structure from an argument. There are no properties necessary for a constructor to be well behaved.

val of_variant : ('b -> 'bt) Base.Variant.t -> (_ -> _ -> 'b, _ -> _ -> 'bt, [< constructor ]) General.t

A Variant.t is not sufficient to define a variant accessor, but is at least sufficient to define a constructor accessor.

Transforming accessors

val invert : (Base.unit -> 'a -> 'b, Base.unit -> 'at -> 'bt, [> isomorphism ]) General.t -> ('i -> 'bt -> 'at, 'i -> 'b -> 'a, [< isomorphism ]) General.t

Turn an isomorphism around. invert (isomorphism ~get:f ~construct:g) is isomorphism ~get:g ~construct:f.

val getter_to_constructor : (Base.unit -> 'a -> _, Base.unit -> 'at -> _, [> getter ]) General.t -> (_ -> _ -> 'at, _ -> _ -> 'a, [< constructor ]) General.t

Turn a getter into a constructor. getter_to_constructor (getter f) is constructor f.

val constructor_to_getter : (_ -> _ -> 'b, _ -> _ -> 'bt, [> constructor ]) General.t -> ('i -> 'bt -> _, 'i -> 'b -> _, [< getter ]) General.t

Turn a constructor into a getter. constructor_to_getter (constructor f) is getter f.

val many_to_list_field : (Base.unit, 'a, 'at, [> many ]) t -> (_, 'a Base.list, 'at, [< field ]) t

Given a many accessor, generate a field accessor that accesses all the elements that would be accessed by the many accessor in the form of a list. When replacing, if the list is too short then later elements in the data structure are left alone, and if the list is too long then extraneous elements are not used.

The resulting accessor is only well-behaved if you preserve the length of the list across getting and setting.

val disjoint_field_product : (Base.unit, 'a, 'c, [> field ]) t -> (Base.unit, 'b, 'c, [> field ]) t -> (_, 'a * 'b, 'c, [< field ]) t

Combine two field accessors into one that accesses both inner values at once. The resulting accessor is only well-behaved if the two input accessors access disjoint parts of the outer structure.

val disjoint_merge : (Base.unit, 'a, 'b, [> many ]) t -> (Base.unit, 'a, 'b, [> many ]) t -> (_, 'a, 'b, [< many ]) t

Combine two many accessors into one that accesses each inner value accessed by each accessor. The resulting accessor is only well-behaved if the two input accessors access disjoint parts of the outer structure.

OCaml

Innovation. Community. Security.