package batteries

  1. Overview
  2. Docs
package batteries
Legend:
Library
Module
Module type
Parameter
Class
Class type
include module type of Batteries with module Array := Batteries.Array and module Hashtbl := Batteries.Hashtbl and module List := Batteries.List and module Map := Batteries.Map and module Queue := Batteries.Queue and module Stack := Batteries.Stack and module String := Batteries.String and module Enum := Batteries.Enum and module LazyList := Batteries.LazyList and module Seq := Batteries.Seq and module Splay := Batteries.Splay
module Legacy : sig ... end
module Buffer = BatBuffer
module Bytes = BatBytes
type bytes = Bytes.t
module Char = BatChar
module Complex = BatComplex
module Digest = BatDigest
module Either = BatEither
module Format = BatFormat
module Gc = BatGc
module Genlex = BatGenlex
module Int32 = BatInt32
module Int64 = BatInt64
module Lexing = BatLexing
module Marshal = BatMarshal
module Nativeint = BatNativeint
module Printexc = BatPrintexc
module Printf = BatPrintf
module Random = BatRandom
module Scanf = BatScanf
module Set = BatSet
module Stream = BatStream
module Sys = BatSys
module Unix = BatUnix
module Big_int = BatBig_int
module Num = BatNum
module Bigarray = BatBigarray
module Base64 = BatBase64
module BitSet = BatBitSet
module Bit_set = BatBitSet
module Dllist = BatDllist
module DynArray = BatDynArray
module File = BatFile
module Global = BatGlobal
module IO = BatIO
module MultiPMap = BatMultiPMap
module Option = BatOption
module RefList = BatRefList
module Ref = BatRef
module Cache = BatCache
module CharParser = BatCharParser
module Deque = BatDeque
module Hashcons = BatHashcons
module Heap = BatHeap
module FingerTree = BatFingerTree
module Logger = BatLogger
module MultiMap = BatMultiMap
module ParserCo = BatParserCo
module Result = BatResult
module Return = BatReturn
module Substring = BatSubstring
module Tuple = BatTuple
module Tuple2 = BatTuple.Tuple2
module Tuple3 = BatTuple.Tuple3
module Tuple4 = BatTuple.Tuple4
module Tuple5 = BatTuple.Tuple5
module Vect = BatVect
module ISet = BatISet
module IMap = BatIMap
module Uref = BatUref
module UChar = BatUChar
module UTF8 = BatUTF8
module Text = BatText
module Concurrent = BatConcurrent
module Interfaces = BatInterfaces
module Number = BatNumber
module Float = BatFloat
module Int = BatInt
module Bool = BatBool
module Unit = BatUnit
module Filename = BatFilename
module Incubator : sig ... end
include module type of Pervasives with type ('a, 'b) result := ('a, 'b) Pervasives.result and type 'a ref = 'a Pervasives.ref and type fpclass = Pervasives.fpclass and type in_channel = Pervasives.in_channel and type out_channel = Pervasives.out_channel and type open_flag = Pervasives.open_flag and type ('a, 'b, 'c, 'd, 'e, 'f) format6 = ('a, 'b, 'c, 'd, 'e, 'f) Pervasives.format6 and type ('a, 'b, 'c, 'd) format4 = ('a, 'b, 'c, 'd) Pervasives.format4 and type ('a, 'b, 'c) format = ('a, 'b, 'c) Pervasives.format
Exceptions
val raise : exn -> 'a

Raise the given exception value

val raise_notrace : exn -> 'a

A faster version raise which does not record the backtrace.

  • since 4.02.0
val invalid_arg : string -> 'a

Raise exception Invalid_argument with the given string.

val failwith : string -> 'a

Raise exception Failure with the given string.

exception Exit

The Exit exception is not raised by any library function. It is provided for use in your programs.

Comparisons
val (=) : 'a -> 'a -> bool

e1 = e2 tests for structural equality of e1 and e2. Mutable structures (e.g. references and arrays) are equal if and only if their current contents are structurally equal, even if the two mutable objects are not the same physical object. Equality between functional values raises Invalid_argument. Equality between cyclic data structures may not terminate.

val (<>) : 'a -> 'a -> bool

Negation of Pervasives.(=).

val (<) : 'a -> 'a -> bool

See Pervasives.(>=).

val (>) : 'a -> 'a -> bool

See Pervasives.(>=).

val (<=) : 'a -> 'a -> bool

See Pervasives.(>=).

val (>=) : 'a -> 'a -> bool

Structural ordering functions. These functions coincide with the usual orderings over integers, characters, strings, byte sequences and floating-point numbers, and extend them to a total ordering over all types. The ordering is compatible with ( = ). As in the case of ( = ), mutable structures are compared by contents. Comparison between functional values raises Invalid_argument. Comparison between cyclic structures may not terminate.

val compare : 'a -> 'a -> int

compare x y returns 0 if x is equal to y, a negative integer if x is less than y, and a positive integer if x is greater than y. The ordering implemented by compare is compatible with the comparison predicates =, < and > defined above, with one difference on the treatment of the float value Pervasives.nan. Namely, the comparison predicates treat nan as different from any other float value, including itself; while compare treats nan as equal to itself and less than any other float value. This treatment of nan ensures that compare defines a total ordering relation.

compare applied to functional values may raise Invalid_argument. compare applied to cyclic structures may not terminate.

The compare function can be used as the comparison function required by the Set.Make and Map.Make functors, as well as the List.sort and Array.sort functions.

val min : 'a -> 'a -> 'a

Return the smaller of the two arguments. The result is unspecified if one of the arguments contains the float value nan.

val max : 'a -> 'a -> 'a

Return the greater of the two arguments. The result is unspecified if one of the arguments contains the float value nan.

val (==) : 'a -> 'a -> bool

e1 == e2 tests for physical equality of e1 and e2. On mutable types such as references, arrays, byte sequences, records with mutable fields and objects with mutable instance variables, e1 == e2 is true if and only if physical modification of e1 also affects e2. On non-mutable types, the behavior of ( == ) is implementation-dependent; however, it is guaranteed that e1 == e2 implies compare e1 e2 = 0.

val (!=) : 'a -> 'a -> bool

Negation of Pervasives.(==).

Boolean operations
val not : bool -> bool

The boolean negation.

val (&&) : bool -> bool -> bool

The boolean 'and'. Evaluation is sequential, left-to-right: in e1 && e2, e1 is evaluated first, and if it returns false, e2 is not evaluated at all.

val (&) : bool -> bool -> bool
val (||) : bool -> bool -> bool

The boolean 'or'. Evaluation is sequential, left-to-right: in e1 || e2, e1 is evaluated first, and if it returns true, e2 is not evaluated at all.

val or : bool -> bool -> bool
Debugging
val __LOC__ : string

__LOC__ returns the location at which this expression appears in the file currently being parsed by the compiler, with the standard error format of OCaml: "File %S, line %d, characters %d-%d".

  • since 4.02.0
val __FILE__ : string

__FILE__ returns the name of the file currently being parsed by the compiler.

  • since 4.02.0
val __LINE__ : int

__LINE__ returns the line number at which this expression appears in the file currently being parsed by the compiler.

  • since 4.02.0
val __MODULE__ : string

__MODULE__ returns the module name of the file being parsed by the compiler.

  • since 4.02.0
val __POS__ : string * int * int * int

__POS__ returns a tuple (file,lnum,cnum,enum), corresponding to the location at which this expression appears in the file currently being parsed by the compiler. file is the current filename, lnum the line number, cnum the character position in the line and enum the last character position in the line.

  • since 4.02.0
val __LOC_OF__ : 'a -> string * 'a

__LOC_OF__ expr returns a pair (loc, expr) where loc is the location of expr in the file currently being parsed by the compiler, with the standard error format of OCaml: "File %S, line %d, characters %d-%d".

  • since 4.02.0
val __LINE_OF__ : 'a -> int * 'a

__LINE__ expr returns a pair (line, expr), where line is the line number at which the expression expr appears in the file currently being parsed by the compiler.

  • since 4.02.0
val __POS_OF__ : 'a -> (string * int * int * int) * 'a

__POS_OF__ expr returns a pair (loc,expr), where loc is a tuple (file,lnum,cnum,enum) corresponding to the location at which the expression expr appears in the file currently being parsed by the compiler. file is the current filename, lnum the line number, cnum the character position in the line and enum the last character position in the line.

  • since 4.02.0
Composition operators
Integer arithmetic

Integers are 31 bits wide (or 63 bits on 64-bit processors). All operations are taken modulo 231 (or 263). They do not fail on overflow.

val (~-) : int -> int

Unary negation. You can also write - e instead of ~- e.

val (~+) : int -> int

Unary addition. You can also write + e instead of ~+ e.

  • since 3.12.0
val succ : int -> int

succ x is x + 1.

val pred : int -> int

pred x is x - 1.

val (+) : int -> int -> int

Integer addition.

val (-) : int -> int -> int

Integer subtraction.

val (*) : int -> int -> int

Integer multiplication.

val (/) : int -> int -> int

Integer division. Raise Division_by_zero if the second argument is 0. Integer division rounds the real quotient of its arguments towards zero. More precisely, if x >= 0 and y > 0, x / y is the greatest integer less than or equal to the real quotient of x by y. Moreover, (- x) / y = x / (- y) = - (x / y).

val (mod) : int -> int -> int

Integer remainder. If y is not zero, the result of x mod y satisfies the following properties: x = (x / y) * y + x mod y and abs(x mod y) <= abs(y) - 1. If y = 0, x mod y raises Division_by_zero. Note that x mod y is negative only if x < 0. Raise Division_by_zero if y is zero.

val abs : int -> int

Return the absolute value of the argument. Note that this may be negative if the argument is min_int.

val max_int : int

The greatest representable integer.

val min_int : int

The smallest representable integer.

Bitwise operations
val (land) : int -> int -> int

Bitwise logical and.

val (lor) : int -> int -> int

Bitwise logical or.

val (lxor) : int -> int -> int

Bitwise logical exclusive or.

val lnot : int -> int

Bitwise logical negation.

val (lsl) : int -> int -> int

n lsl m shifts n to the left by m bits. The result is unspecified if m < 0 or m >= bitsize, where bitsize is 32 on a 32-bit platform and 64 on a 64-bit platform.

val (lsr) : int -> int -> int

n lsr m shifts n to the right by m bits. This is a logical shift: zeroes are inserted regardless of the sign of n. The result is unspecified if m < 0 or m >= bitsize.

val (asr) : int -> int -> int

n asr m shifts n to the right by m bits. This is an arithmetic shift: the sign bit of n is replicated. The result is unspecified if m < 0 or m >= bitsize.

Floating-point arithmetic

OCaml's floating-point numbers follow the IEEE 754 standard, using double precision (64 bits) numbers. Floating-point operations never raise an exception on overflow, underflow, division by zero, etc. Instead, special IEEE numbers are returned as appropriate, such as infinity for 1.0 /. 0.0, neg_infinity for -1.0 /. 0.0, and nan ('not a number') for 0.0 /. 0.0. These special numbers then propagate through floating-point computations as expected: for instance, 1.0 /. infinity is 0.0, and any arithmetic operation with nan as argument returns nan as result.

val (~-.) : float -> float

Unary negation. You can also write -. e instead of ~-. e.

val (~+.) : float -> float

Unary addition. You can also write +. e instead of ~+. e.

  • since 3.12.0
val (+.) : float -> float -> float

Floating-point addition

val (-.) : float -> float -> float

Floating-point subtraction

val (*.) : float -> float -> float

Floating-point multiplication

val (/.) : float -> float -> float

Floating-point division.

val (**) : float -> float -> float

Exponentiation.

val sqrt : float -> float

Square root.

val exp : float -> float

Exponential.

val log : float -> float

Natural logarithm.

val log10 : float -> float

Base 10 logarithm.

val expm1 : float -> float

expm1 x computes exp x -. 1.0, giving numerically-accurate results even if x is close to 0.0.

  • since 3.12.0
val log1p : float -> float

log1p x computes log(1.0 +. x) (natural logarithm), giving numerically-accurate results even if x is close to 0.0.

  • since 3.12.0
val cos : float -> float

Cosine. Argument is in radians.

val sin : float -> float

Sine. Argument is in radians.

val tan : float -> float

Tangent. Argument is in radians.

val acos : float -> float

Arc cosine. The argument must fall within the range [-1.0, 1.0]. Result is in radians and is between 0.0 and pi.

val asin : float -> float

Arc sine. The argument must fall within the range [-1.0, 1.0]. Result is in radians and is between -pi/2 and pi/2.

val atan : float -> float

Arc tangent. Result is in radians and is between -pi/2 and pi/2.

val atan2 : float -> float -> float

atan2 y x returns the arc tangent of y /. x. The signs of x and y are used to determine the quadrant of the result. Result is in radians and is between -pi and pi.

val hypot : float -> float -> float

hypot x y returns sqrt(x *. x + y *. y), that is, the length of the hypotenuse of a right-angled triangle with sides of length x and y, or, equivalently, the distance of the point (x,y) to origin. If one of x or y is infinite, returns infinity even if the other is nan.

  • since 4.00.0
val cosh : float -> float

Hyperbolic cosine. Argument is in radians.

val sinh : float -> float

Hyperbolic sine. Argument is in radians.

val tanh : float -> float

Hyperbolic tangent. Argument is in radians.

val ceil : float -> float

Round above to an integer value. ceil f returns the least integer value greater than or equal to f. The result is returned as a float.

val floor : float -> float

Round below to an integer value. floor f returns the greatest integer value less than or equal to f. The result is returned as a float.

val abs_float : float -> float

abs_float f returns the absolute value of f.

val copysign : float -> float -> float

copysign x y returns a float whose absolute value is that of x and whose sign is that of y. If x is nan, returns nan. If y is nan, returns either x or -. x, but it is not specified which.

  • since 4.00.0
val mod_float : float -> float -> float

mod_float a b returns the remainder of a with respect to b. The returned value is a -. n *. b, where n is the quotient a /. b rounded towards zero to an integer.

val frexp : float -> float * int

frexp f returns the pair of the significant and the exponent of f. When f is zero, the significant x and the exponent n of f are equal to zero. When f is non-zero, they are defined by f = x *. 2 ** n and 0.5 <= x < 1.0.

val ldexp : float -> int -> float

ldexp x n returns x *. 2 ** n.

val modf : float -> float * float

modf f returns the pair of the fractional and integral part of f.

val float : int -> float

Same as Pervasives.float_of_int.

val float_of_int : int -> float

Convert an integer to floating-point.

val truncate : float -> int

Same as Pervasives.int_of_float.

val int_of_float : float -> int

Truncate the given floating-point number to an integer. The result is unspecified if the argument is nan or falls outside the range of representable integers.

val infinity : float

Positive infinity.

val neg_infinity : float

Negative infinity.

val nan : float

A special floating-point value denoting the result of an undefined operation such as 0.0 /. 0.0. Stands for 'not a number'. Any floating-point operation with nan as argument returns nan as result. As for floating-point comparisons, =, <, <=, > and >= return false and <> returns true if one or both of their arguments is nan.

val max_float : float

The largest positive finite value of type float.

val min_float : float

The smallest positive, non-zero, non-denormalized value of type float.

val epsilon_float : float

The difference between 1.0 and the smallest exactly representable floating-point number greater than 1.0.

type fpclass = Pervasives.fpclass =
  1. | FP_normal
    (*

    Normal number, none of the below

    *)
  2. | FP_subnormal
    (*

    Number very close to 0.0, has reduced precision

    *)
  3. | FP_zero
    (*

    Number is 0.0 or -0.0

    *)
  4. | FP_infinite
    (*

    Number is positive or negative infinity

    *)
  5. | FP_nan
    (*

    Not a number: result of an undefined operation

    *)

The five classes of floating-point numbers, as determined by the Pervasives.classify_float function.

val classify_float : float -> fpclass

Return the class of the given floating-point number: normal, subnormal, zero, infinite, or not a number.

String operations

More string operations are provided in module String.

val (^) : string -> string -> string

String concatenation.

Character operations

More character operations are provided in module Char.

val int_of_char : char -> int

Return the ASCII code of the argument.

val char_of_int : int -> char

Return the character with the given ASCII code. Raise Invalid_argument "char_of_int" if the argument is outside the range 0--255.

Unit operations
val ignore : 'a -> unit

Discard the value of its argument and return (). For instance, ignore(f x) discards the result of the side-effecting function f. It is equivalent to f x; (), except that the latter may generate a compiler warning; writing ignore(f x) instead avoids the warning.

String conversion functions
val string_of_bool : bool -> string

Return the string representation of a boolean. As the returned values may be shared, the user should not modify them directly.

val bool_of_string : string -> bool

Convert the given string to a boolean. Raise Invalid_argument "bool_of_string" if the string is not "true" or "false".

val bool_of_string_opt : string -> bool option

Convert the given string to a boolean. Return None if the string is not "true" or "false".

  • since 4.05
val string_of_int : int -> string

Return the string representation of an integer, in decimal.

val int_of_string : string -> int

Convert the given string to an integer. The string is read in decimal (by default), in hexadecimal (if it begins with 0x or 0X), in octal (if it begins with 0o or 0O), or in binary (if it begins with 0b or 0B). The _ (underscore) character can appear anywhere in the string and is ignored. Raise Failure "int_of_string" if the given string is not a valid representation of an integer, or if the integer represented exceeds the range of integers representable in type int.

val int_of_string_opt : string -> int option

Same as int_of_string, but returs None instead of raising.

  • since 4.05
val string_of_float : float -> string

Return the string representation of a floating-point number.

val float_of_string : string -> float

Convert the given string to a float. The string is read in decimal (by default) or in hexadecimal (marked by 0x or 0X). The format of decimal floating-point numbers is [-] dd.ddd (e|E) [+|-] dd , where d stands for a decimal digit. The format of hexadecimal floating-point numbers is [-] 0(x|X) hh.hhh (p|P) [+|-] dd , where h stands for an hexadecimal digit and d for a decimal digit. In both cases, at least one of the integer and fractional parts must be given; the exponent part is optional. The _ (underscore) character can appear anywhere in the string and is ignored. Depending on the execution platforms, other representations of floating-point numbers can be accepted, but should not be relied upon. Raise Failure "float_of_string" if the given string is not a valid representation of a float.

val float_of_string_opt : string -> float option

Same as float_of_string, but returns None instead of raising.

  • since 4.05
Pair operations
val fst : ('a * 'b) -> 'a

Return the first component of a pair.

val snd : ('a * 'b) -> 'b

Return the second component of a pair.

List operations

More list operations are provided in module List.

Input/output

Note: all input/output functions can raise Sys_error when the system calls they invoke fail.

type in_channel = Pervasives.in_channel

The type of input channel.

type out_channel = Pervasives.out_channel

The type of output channel.

Output functions on standard output
val print_char : char -> unit

Print a character on standard output.

val print_string : string -> unit

Print a string on standard output.

val print_bytes : bytes -> unit

Print a byte sequence on standard output.

  • since 4.02.0
val print_int : int -> unit

Print an integer, in decimal, on standard output.

val print_float : float -> unit

Print a floating-point number, in decimal, on standard output.

val print_endline : string -> unit

Print a string, followed by a newline character, on standard output and flush standard output.

val print_newline : unit -> unit

Print a newline character on standard output, and flush standard output. This can be used to simulate line buffering of standard output.

Output functions on standard error
val prerr_char : char -> unit

Print a character on standard error.

val prerr_string : string -> unit

Print a string on standard error.

val prerr_bytes : bytes -> unit

Print a byte sequence on standard error.

  • since 4.02.0
val prerr_int : int -> unit

Print an integer, in decimal, on standard error.

val prerr_float : float -> unit

Print a floating-point number, in decimal, on standard error.

val prerr_endline : string -> unit

Print a string, followed by a newline character on standard error and flush standard error.

val prerr_newline : unit -> unit

Print a newline character on standard error, and flush standard error.

Input functions on standard input
val read_line : unit -> string

Flush standard output, then read characters from standard input until a newline character is encountered. Return the string of all characters read, without the newline character at the end.

val read_int : unit -> int

Flush standard output, then read one line from standard input and convert it to an integer. Raise Failure "int_of_string" if the line read is not a valid representation of an integer.

val read_int_opt : unit -> int option

Same as read_int_opt, but returs None instead of raising.

  • since 4.05
val read_float : unit -> float

Flush standard output, then read one line from standard input and convert it to a floating-point number. The result is unspecified if the line read is not a valid representation of a floating-point number.

val read_float_opt : unit -> float option

Flush standard output, then read one line from standard input and convert it to a floating-point number. Returns None if the line read is not a valid representation of a floating-point number.

  • since 4.05.0
General output functions
type open_flag = Pervasives.open_flag =
  1. | Open_rdonly
    (*

    open for reading.

    *)
  2. | Open_wronly
    (*

    open for writing.

    *)
  3. | Open_append
    (*

    open for appending: always write at end of file.

    *)
  4. | Open_creat
    (*

    create the file if it does not exist.

    *)
  5. | Open_trunc
    (*

    empty the file if it already exists.

    *)
  6. | Open_excl
    (*

    fail if Open_creat and the file already exists.

    *)
  7. | Open_binary
    (*

    open in binary mode (no conversion).

    *)
  8. | Open_text
    (*

    open in text mode (may perform conversions).

    *)
  9. | Open_nonblock
    (*

    open in non-blocking mode.

    *)

Opening modes for Pervasives.open_out_gen and Pervasives.open_in_gen.

val output_bytes : out_channel -> bytes -> unit

Write the byte sequence on the given output channel.

  • since 4.02.0
val seek_out : out_channel -> int -> unit

seek_out chan pos sets the current writing position to pos for channel chan. This works only for regular files. On files of other kinds (such as terminals, pipes and sockets), the behavior is unspecified.

val pos_out : out_channel -> int

Return the current writing position for the given channel. Does not work on channels opened with the Open_append flag (returns unspecified results).

val out_channel_length : out_channel -> int

Return the size (number of characters) of the regular file on which the given channel is opened. If the channel is opened on a file that is not a regular file, the result is meaningless.

val set_binary_mode_out : out_channel -> bool -> unit

set_binary_mode_out oc true sets the channel oc to binary mode: no translations take place during output. set_binary_mode_out oc false sets the channel oc to text mode: depending on the operating system, some translations may take place during output. For instance, under Windows, end-of-lines will be translated from \n to \r\n. This function has no effect under operating systems that do not distinguish between text mode and binary mode.

General input functions
val really_input_string : in_channel -> int -> string

really_input_string ic len reads len characters from channel ic and returns them in a new string. Raise End_of_file if the end of file is reached before len characters have been read.

  • since 4.02.0
val seek_in : in_channel -> int -> unit

seek_in chan pos sets the current reading position to pos for channel chan. This works only for regular files. On files of other kinds, the behavior is unspecified.

val pos_in : in_channel -> int

Return the current reading position for the given channel.

val in_channel_length : in_channel -> int

Return the size (number of characters) of the regular file on which the given channel is opened. If the channel is opened on a file that is not a regular file, the result is meaningless. The returned size does not take into account the end-of-line translations that can be performed when reading from a channel opened in text mode.

val set_binary_mode_in : in_channel -> bool -> unit

set_binary_mode_in ic true sets the channel ic to binary mode: no translations take place during input. set_binary_mode_out ic false sets the channel ic to text mode: depending on the operating system, some translations may take place during input. For instance, under Windows, end-of-lines will be translated from \r\n to \n. This function has no effect under operating systems that do not distinguish between text mode and binary mode.

Operations on large files
module LargeFile : sig ... end

Operations on large files. This sub-module provides 64-bit variants of the channel functions that manipulate file positions and file sizes. By representing positions and sizes by 64-bit integers (type int64) instead of regular integers (type int), these alternate functions allow operating on files whose sizes are greater than max_int.

References
type 'a ref = 'a Pervasives.ref = {
  1. mutable contents : 'a;
}

The type of references (mutable indirection cells) containing a value of type 'a.

val ref : 'a -> 'a ref

Return a fresh reference containing the given value.

val (!) : 'a ref -> 'a

!r returns the current contents of reference r. Equivalent to fun r -> r.contents.

val (:=) : 'a ref -> 'a -> unit

r := a stores the value of a in reference r. Equivalent to fun r v -> r.contents <- v.

val incr : int ref -> unit

Increment the integer contained in the given reference. Equivalent to fun r -> r := succ !r.

val decr : int ref -> unit

Decrement the integer contained in the given reference. Equivalent to fun r -> r := pred !r.

Result type
Operations on format strings

Format strings are character strings with special lexical conventions that defines the functionality of formatted input/output functions. Format strings are used to read data with formatted input functions from module Scanf and to print data with formatted output functions from modules Printf and Format.

Format strings are made of three kinds of entities:

  • conversions specifications, introduced by the special character '%' followed by one or more characters specifying what kind of argument to read or print,
  • formatting indications, introduced by the special character '@' followed by one or more characters specifying how to read or print the argument,
  • plain characters that are regular characters with usual lexical conventions. Plain characters specify string literals to be read in the input or printed in the output.

There is an additional lexical rule to escape the special characters '%' and '@' in format strings: if a special character follows a '%' character, it is treated as a plain character. In other words, "%%" is considered as a plain '%' and "%@" as a plain '@'.

For more information about conversion specifications and formatting indications available, read the documentation of modules Scanf, Printf and Format.

Format strings have a general and highly polymorphic type ('a, 'b, 'c, 'd, 'e, 'f) format6. The two simplified types, format and format4 below are included for backward compatibility with earlier releases of OCaml.

The meaning of format string type parameters is as follows:

  • 'a is the type of the parameters of the format for formatted output functions (printf-style functions); 'a is the type of the values read by the format for formatted input functions (scanf-style functions).
  • 'b is the type of input source for formatted input functions and the type of output target for formatted output functions. For printf-style functions from module Printf, 'b is typically out_channel; for printf-style functions from module Format, 'b is typically Format.formatter; for scanf-style functions from module Scanf, 'b is typically Scanf.Scanning.in_channel.

Type argument 'b is also the type of the first argument given to user's defined printing functions for %a and %t conversions, and user's defined reading functions for %r conversion.

  • 'c is the type of the result of the %a and %t printing functions, and also the type of the argument transmitted to the first argument of kprintf-style functions or to the kscanf-style functions.
  • 'd is the type of parameters for the scanf-style functions.
  • 'e is the type of the receiver function for the scanf-style functions.
  • 'f is the final result type of a formatted input/output function invocation: for the printf-style functions, it is typically unit; for the scanf-style functions, it is typically the result type of the receiver function.
type ('a, 'b, 'c, 'd, 'e, 'f) format6 = ('a, 'b, 'c, 'd, 'e, 'f) Pervasives.format6
type ('a, 'b, 'c, 'd) format4 = ('a, 'b, 'c, 'd) Pervasives.format4
type ('a, 'b, 'c) format = ('a, 'b, 'c) Pervasives.format
val string_of_format : ('a, 'b, 'c, 'd, 'e, 'f) format6 -> string

Converts a format string into a string.

val format_of_string : ('a, 'b, 'c, 'd, 'e, 'f) format6 -> ('a, 'b, 'c, 'd, 'e, 'f) format6

format_of_string s returns a format string read from the string literal s. Note: format_of_string can not convert a string argument that is not a literal. If you need this functionality, use the more general Scanf.format_from_string function.

val (^^) : ('a, 'b, 'c, 'd, 'e, 'f) format6 -> ('f, 'b, 'c, 'e, 'g, 'h) format6 -> ('a, 'b, 'c, 'd, 'g, 'h) format6

f1 ^^ f2 catenates format strings f1 and f2. The result is a format string that behaves as the concatenation of format strings f1 and f2: in case of formatted output, it accepts arguments from f1, then arguments from f2; in case of formatted input, it returns results from f1, then results from f2.

Program termination
val exit : int -> 'a

Terminate the process, returning the given status code to the operating system: usually 0 to indicate no errors, and a small positive integer to indicate failure. All open output channels are flushed with flush_all. An implicit exit 0 is performed each time a program terminates normally. An implicit exit 2 is performed if the program terminates early because of an uncaught exception.

val at_exit : (unit -> unit) -> unit

Register the given function to be called at program termination time. The functions registered with at_exit will be called when the program executes Pervasives.exit, or terminates, either normally or because of an uncaught exception. The functions are called in 'last in, first out' order: the function most recently added with at_exit is called first.

include module type of struct include BatPervasives end
Additional functions.
  • author Xavier Leroy (Base module)
  • author Nicolas Cannasse
  • author David Teller
  • author Zheng Li

The initially opened module.

This module provides the basic operations over the built-in types (numbers, booleans, strings, exceptions, references, lists, arrays, input-output channels, ...)

This module is automatically opened at the beginning of each compilation. All components of this module can therefore be referred by their short name, without prefixing them by BatPervasives.

  • author Xavier Leroy (Base module)
  • author Nicolas Cannasse
  • author David Teller
  • author Zheng Li
val input_lines : Pervasives.in_channel -> string BatEnum.t

Returns an enumeration over lines of an input channel, as read by the input_line function.

val input_chars : Pervasives.in_channel -> char BatEnum.t

Returns an enumeration over characters of an input channel.

val input_list : Pervasives.in_channel -> string list

Returns the list of lines read from an input channel.

val input_all : Pervasives.in_channel -> string

Return the whole contents of an input channel as a single string.

val dump : 'a -> string

Attempt to convert a value to a string.

Works well for a lot of cases such as non-empty lists, algebraic datatype, and records.

However, since types are lost at compile-time, the representation might not match your type. (0, 1) will be printed as expected, but (1, 0) and 1 have the same representation and will get printed in the same way. The result of dump is unspecified and may change in future versions, so you should only use it for debugging and never have program behavior depend on the output.

Here is a list of some of the surprising corner cases of the current implementation:

  • (3, 0) is printed 3, (0.5, 0) is printed 0.5, etc.
  • None, false and are printed 0

dump may fail for ill-formed values, such as obtained from a faulty C binding or crazy uses of Obj.set_tag.

val print_any : 'b BatIO.output -> 'a -> unit

Attempt to print a value to an output.

Uses dump to convert the value to a string and prints that string to the output.

List operations

More list operations are provided in module List.

val (@) : 'a list -> 'a list -> 'a list

List concatenation.

Input/output

This section only contains the most common input/output operations. More operations may be found in modules BatIO and File.

val stdin : BatIO.input

Standard input, as per Unix/Windows conventions (by default, keyboard).

Use this input to read what the user is writing on the keyboard.

val stdout : unit BatIO.output

Standard output, as per Unix/Windows conventions (by default, console).

Use this output to display regular messages.

val stderr : unit BatIO.output

Standard error output, as per Unix/Windows conventions.

Use this output to display warnings and error messages.

val stdnull : unit BatIO.output

An output which discards everything written to it.

Use this output to ignore messages.

val flush_all : unit -> unit

Write all pending data to output channels, ignore all errors.

It is normally not necessary to call this function, as all pending data is written when an output channel is closed or when the program itself terminates, either normally or because of an uncaught exception. However, this function is useful for debugging, as it forces pending data to be written immediately.

Output functions on standard output
val print_bool : bool -> unit

Print a boolean on standard output.

val print_guess : 'a BatIO.output -> 'b -> unit

Attempt to print the representation of a runtime value on the standard output. See remarks for dump. This function is useful mostly for debugging. As a general rule, it should not be used in production code.

val print_all : BatIO.input -> unit

Print the contents of an input to the standard output.

Output functions on standard error
val prerr_bool : bool -> unit

Print a boolean to stderr.

val prerr_guess : 'a -> unit

Attempt to print the representation of a runtime value on the error output. See remarks for dump. This function is useful mostly for debugging.

val prerr_all : BatIO.input -> unit

Print the contents of an input to the error output.

General output functions
val output_file : filename:string -> text:string -> unit

creates a filename, write text into it and close it.

val open_out : ?mode:BatFile.open_out_flag list -> ?perm:BatFile.permission -> string -> unit BatIO.output

Open the named file for writing, and return a new output channel on that file. You will need to close the file once you have finished using it.

You may use optional argument mode to decide whether the output will overwrite the contents of the file (by default) or to add things at the end of the file, whether the file should be created if it does not exist yet (the default) or not, whether this operation should proceed if the file exists already (the default) or not, whether the file should be opened as text (the default) or as binary, and whether the file should be opened for non-blocking operations.

You may use optional argument perm to specify the permissions of the file, as per Unix conventions. By default, files are created with default permissions (which depend on your setup).

  • raises Sys_error

    if the file could not be opened.

val open_out_bin : string -> unit BatIO.output

Same as open_out, but the file is opened in binary mode, so that no translation takes place during writes. On operating systems that do not distinguish between text mode and binary mode, this function behaves like open_out without any mode or perm.

val open_out_gen : Pervasives.open_flag list -> int -> string -> unit BatIO.output

open_out_gen mode perm filename opens the named file for writing, as described above. The extra argument mode specifies the opening mode. The extra argument perm specifies the file permissions, in case the file must be created.

  • deprecated

    Use open_outinstead

val flush : unit BatIO.output -> unit

Flush the buffer associated with the given output, performing all pending writes on that channel. Interactive programs must be careful about flushing standard output and standard error at the right time.

val output_char : unit BatIO.output -> char -> unit

Write the character on the given output channel.

val output_string : unit BatIO.output -> string -> unit

Write the string on the given output channel.

val output : unit BatIO.output -> Bytes.t -> int -> int -> unit

output oc buf pos len writes len characters from byte sequence buf, starting at offset pos, to the given output channel oc.

  • raises Invalid_argument

    if pos and len do not designate a valid subsequence of buf.

val output_substring : unit BatIO.output -> string -> int -> int -> unit

output_substring oc buf pos len writes len characters from string buf, starting at offset pos, to the given output channel oc.

  • raises Invalid_argument

    if pos and len do not designate a valid substring of buf.

val output_byte : unit BatIO.output -> int -> unit

Write one 8-bit integer (as the single character with that code) on the given output channel. The given integer is taken modulo 256.

val output_binary_int : unit BatIO.output -> int -> unit

Write one integer in binary format (4 bytes, big-endian) on the given output channel. The given integer is taken modulo 232. The only reliable way to read it back is through the Pervasives.input_binary_int function. The format is compatible across all machines for a given version of OCaml.

val output_binary_float : unit BatIO.output -> float -> unit

Write one float in binary format (8 bytes, IEEE 754 double format) on the given output channel. The only reliable way to read it back is through the Pervasives.input_binary_float function. The format is compatible across all machines for a given version of OCaml.

val output_value : unit BatIO.output -> 'a -> unit

Write the representation of a structured value of any type to a channel. Circularities and sharing inside the value are detected and preserved. The object can be read back, by the function input_value. See the description of module Marshal for more information. output_value is equivalent to Marshal.output with an empty list of flags.

val close_out : unit BatIO.output -> unit

Close the given channel, flushing all buffered write operations. Output functions raise a Sys_error exception when they are applied to a closed output channel, except close_out and flush, which do nothing when applied to an already closed channel.

  • raises Sys_error

    if the operating system signals an error when flushing or closing.

val close_out_noerr : unit BatIO.output -> unit

Same as close_out, but ignore all errors.

General input functions
val input_file : ?bin:bool -> string -> string

returns the data of a given filename.

val open_in : ?mode:BatFile.open_in_flag list -> ?perm:BatFile.permission -> string -> BatIO.input

Open the named file for reading. You will need to close the file once you have finished using it.

You may use optional argument mode to decide whether the opening should fail if the file doesn't exist yet (by default) or whether the file should be created if it doesn't exist yet, whether the opening should fail if the file already exists or not (by default), whether the file should be read as binary (by default) or as text, and whether reading should be non-blocking.

You may use optional argument perm to specify the permissions of the file, should it be created, as per Unix conventions. By default, files are created with default permissions (which depend on your setup).

  • raises Sys_error

    if the file could not be opened.

val open_in_bin : string -> BatIO.input

Same as Pervasives.open_in, but the file is opened in binary mode, so that no translation takes place during reads. On operating systems that do not distinguish between text mode and binary mode, this function behaves like Pervasives.open_in.

val open_in_gen : Pervasives.open_flag list -> int -> string -> BatIO.input

open_in_gen mode perm filename opens the named file for reading, as described above. The extra arguments mode and perm specify the opening mode and file permissions. Pervasives.open_in and Pervasives.open_in_bin are special cases of this function.

  • deprecated

    Use open_ininstead

val input_char : BatIO.input -> char

Read one character from the given input channel.

  • raises End_of_file

    if there are no more characters to read.

val input_line : BatIO.input -> string

Read characters from the given input channel, until a newline character is encountered. Return the string of all characters read, without the newline character at the end.

  • raises End_of_file

    if the end of the file is reached at the beginning of line.

val input : BatIO.input -> Bytes.t -> int -> int -> int

input ic buf pos len reads up to len characters from the given channel ic, storing them in byte sequence buf, starting at character number pos. It returns the actual number of characters read, between 0 and len (inclusive). A return value of 0 means that the end of file was reached. A return value between 0 and len exclusive means that not all requested len characters were read, either because no more characters were available at that time, or because the implementation found it convenient to do a partial read; input must be called again to read the remaining characters, if desired. (See also Pervasives.really_input for reading exactly len characters.)

  • raises Invalid_argument

    if pos and len do not designate a valid subsequence of buf.

val really_input : BatIO.input -> Bytes.t -> int -> int -> unit

really_input ic buf pos len reads len characters from channel ic, storing them in byte sequence buf, starting at character number pos.

  • raises End_of_file

    if the end of file is reached before len characters have been read.

  • raises Invalid_argument

    if pos and len do not designate a valid subsequence of buf.

val input_byte : BatIO.input -> int

Same as Pervasives.input_char, but return the 8-bit integer representing the character.

  • raises End_of_file

    if an end of file was reached.

val input_binary_int : BatIO.input -> int

Read an integer encoded in binary format (4 bytes, big-endian) from the given input channel. See Pervasives.output_binary_int.

  • raises End_of_file

    if an end of file was reached while reading the integer.

val input_binary_float : BatIO.input -> float

Read a float encoded in binary format (8 bytes, IEEE 754 double format) from the given input channel. See Pervasives.output_binary_float.

  • raises End_of_file

    if an end of file was reached while reading the float.

val input_value : BatIO.input -> 'a

Read the representation of a structured value, as produced by output_value, and return the corresponding value. This function is identical to Marshal.input; see the description of module Marshal for more information, in particular concerning the lack of type safety.

val close_in : BatIO.input -> unit

Close the given channel. Input functions raise a Sys_error exception when they are applied to a closed input channel, except close_in, which does nothing when applied to an already closed channel.

  • raises Sys_error

    if the operating system signals an error.

val close_in_noerr : BatIO.input -> unit

Same as close_in, but ignore all errors.

Fundamental functions and operators
val identity : 'a -> 'a

The identity function.

val undefined : ?message:string -> 'a -> 'b

The undefined function.

Evaluating undefined x always fails and raises an exception "Undefined". Optional argument message permits the customization of the error message.

val (@@) : ('a -> 'b) -> 'a -> 'b

Function application. f @@ x is equivalent to f x. However, it binds less tightly (between :: and =,<,>,etc) and is right-associative, which makes it useful for composing sequences of function calls without too many parentheses. It is similar to Haskell's $. Note that it replaces pre-2.0 **> and <|.

val (%) : ('a -> 'b) -> ('c -> 'a) -> 'c -> 'b

Function composition: the mathematical o operator. f % g is fun x -> f (g x). It is similar to Haskell's ..

Examples: the following are equivalent: f (g (h x)), f @@ g @@ h x, f % g % h @@ x.

val (|>) : 'a -> ('a -> 'b) -> 'b

The "pipe": function application. x |> f is equivalent to f x.

This operator is commonly used to write a function composition by order of evaluation (the order used in object-oriented programming) rather than by inverse order (the order typically used in functional programming).

For instance, g (f x) means "apply f to x, then apply g to the result." The corresponding notation in most object-oriented programming languages would be somewhere along the lines of x.f.g.h(), or "starting from x, apply f, then apply g." In OCaml, using the ( |> ) operator, this is written x |> f |> g |> h.

This operator may also be useful for composing sequences of function calls without too many parentheses.

val (%>) : ('a -> 'b) -> ('b -> 'c) -> 'a -> 'c

Piping function composition. f %> g is fun x -> g (f x). Whereas f % g applies g first and f second, f %> g applies f, then g. Note that it plays well with pipes, so for instance x |> f %> g %> h |> i %> j yields the expected result... but in such cases it's still recommended to use |> only. Note that it replaces pre-2.0 |-, which didn't integrate with pipes.

val (|?) : 'a option -> 'a -> 'a

Like BatOption.default, with the arguments reversed. None |? 10 returns 10, while Some "foo" |? "bar" returns "foo".

Note This operator does not short circuit like ( || ) and ( && ). Both arguments will be evaluated.

  • since 2.0
val flip : ('a -> 'b -> 'c) -> 'b -> 'a -> 'c

Argument flipping.

flip f x y is f y x. Don't abuse this function, it may shorten considerably your code but it also has the nasty habit of making it harder to read.

val curry : (('a * 'b) -> 'c) -> 'a -> 'b -> 'c

Convert a function which accepts a pair of arguments into a function which accepts two arguments.

curry f is fun x y -> f (x,y)

val uncurry : ('a -> 'b -> 'c) -> ('a * 'b) -> 'c

Convert a function which accepts two arguments into a function which accepts a pair of arguments.

uncurry f is fun (x, y) -> f x y

val neg : ('a -> bool) -> 'a -> bool

neg p returns a new predicate that is the negation of the given predicate. That is, the new predicate returns false when the input predicate returns true and vice versa. This is for predicates with one argument.

neg p is fun x -> not (p x)

val neg2 : ('a -> 'b -> bool) -> 'a -> 'b -> bool

as neg but for predicates with two arguments

val const : 'a -> _ -> 'a

Ignore its second argument.

const x is the function which always returns x.

val unique : unit -> int

Returns an unique identifier every time it is called.

Note This is thread-safe.

val tap : ('a -> unit) -> 'a -> 'a

Allows application of a function in the middle of a pipe sequence without disturbing the sequence. x |> tap f evaluates to x, but has the side effect of f x. Useful for debugging.

val finally : (unit -> unit) -> ('a -> 'b) -> 'a -> 'b

finally fend f x calls f x and then fend() even if f x raised an exception.

val with_dispose : dispose:('a -> unit) -> ('a -> 'b) -> 'a -> 'b

with_dispose dispose f x invokes f on x, calling dispose x when f terminates (either with a return value or an exception).

val forever : ('a -> 'b) -> 'a -> unit

forever f x invokes f on x repeatedly (until an exception occurs).

val ignore_exceptions : ('a -> 'b) -> 'a -> unit

ignore_exceptions f x invokes f on x, ignoring both the returned value and the exceptions that may be raised.

val verify_arg : bool -> string -> unit

verify_arg condition message will raise Invalid_argument message if condition is false, otherwise it does nothing.

  • since 2.0
val args : unit -> string BatEnum.t

An enumeration of the arguments passed to this program through the command line.

args () is given by the elements of Sys.argv, minus the first element.

val exe : string

The name of the current executable.

exe is given by the first argument of Sys.argv

Enumerations

In OCaml Batteries Included, all data structures are enumerable, which means that they support a number of standard operations, transformations, etc. The general manner of enumerating the contents of a data structure is to invoke the enum function of your data structure.

For instance, you may use the foreach loop to apply a function f to all the consecutive elements of a string s. For this purpose, you may write either foreach (String.enum s) f or open String in foreach (enum s) f. Either possibility states that you are enumerating through a character string s. Should you prefer your enumeration to proceed from the end of the string to the beginning, you may replace String.enum with String.backwards. Therefore, either foreach (String.backwards s) f or open String in foreach (backwards s) f will apply f to all the consecutive elements of string s, from the last to the first.

Similarly, you may use List.enum instead of String.enum to visit the elements of a list in the usual order, or List.backwards instead of String.backwards to visit them in the opposite order, or Hashtbl.enum for hash tables, etc.

More operations on enumerations are defined in module BatEnum, including the necessary constructors to make your own structures enumerable.

The various kinds of loops are detailed further in this documentation.

val foreach : 'a BatEnum.t -> ('a -> unit) -> unit

Imperative loop on an enumeration.

foreach e f applies function f to each successive element of e. For instance, foreach (1 -- 10) print_int invokes function print_int on 1, 2, ..., 10, printing 12345678910.

Note This function is one of the many loops available on enumerations. Other commonly used loops are iter (same usage scenario as foreach, but with different notations), map (convert an enumeration to another enumeration) or fold (flatten an enumeration by applying an operation to each element).

General-purpose loops

opic loops

The following functions are the three main general-purpose loops available in OCaml. By opposition to the loops available in imperative languages, OCaml loops are regular functions, which may be passed, composed, currified, etc. In particular, each of these loops may be considered either as a manner of applying a function to a data structure or as transforming a function into another function which will act on a whole data structure.

For instance, if f is a function operating on one value, you may lift this function to operate on all values of an enumeration (and consequently on all values of any data structure of OCaml Batteries Included) by applying iter, map or fold to this function.

val iter : ('a -> unit) -> 'a BatEnum.t -> unit

Imperative loop on an enumeration. This loop is typically used to lift a function with an effect but no meaningful result and get it to work on enumerations.

If f is a function iter f is a function which behaves as f but acts upon enumerations rather than individual elements. As indicated in the type of iter, f must produce values of type unit (i.e. f has no meaningful result) the resulting function produces no meaningful result either.

In other words, iter f is a function which, when applied upon an enumeration e, calls f with each element of e in turn.

For instance, iter f (1 -- 10) invokes function f on 1, 2, ..., 10 and produces value ().

val map : ('a -> 'b) -> 'a BatEnum.t -> 'b BatEnum.t

Transformation loop on an enumeration, used to build an enumeration from another enumeration. This loop is typically used to transform an enumeration into another enumeration with the same number of elements, in the same order.

If f is a function, map f e is a function which behaves as f but acts upon enumerations rather than individual elements -- and builds a new enumeration from the results of each application.

In other words, map f is a function which, when applied upon an enumeration containing elements e0, e1, ..., produces enumeration f e0, f e1, ...

For instance, if odd is the function which returns true when applied to an odd number or false when applied to an even number, map odd (1 -- 10) produces enumeration true, false, true, ..., false.

Similarly, if square is the function fun x -> x * x, map square (1 -- 10) produces the enumeration of the square numbers of all numbers between 1 and 10.

val filter_map : ('a -> 'b option) -> 'a BatEnum.t -> 'b BatEnum.t

Similar to a map, except that you can skip over some items of the incoming enumeration by returning None instead of Some value. Think of it as a filter combined with a map.

val reduce : ('a -> 'a -> 'a) -> 'a BatEnum.t -> 'a

Transformation loop on an enumeration, used to build a single value from an enumeration.

If f is a function and e is an enumeration, reduce f e applies function f to the first two elements of e, then to the result of this expression and to the third element of e, then to the result of this new expression and to the fourth element of e...

In other words, reduce f e returns a0 if e contains only one element a0, otherwise f (... (f (f a0) a1) ...) aN where a0,a1..aN are the elements of e.

  • raises Not_found

    if e is empty.

    For instance, if add is the function fun x y -> x + y, reduce add is the function which computes the sum of the elements of an enumeration -- and doesn't work on empty enumerations. Therefore, reduce add (1 -- 10) produces result 55.

val fold : ('b -> 'a -> 'b) -> 'b -> 'a BatEnum.t -> 'b

Transformation loop on an enumeration, used to build a single value from an enumeration. This is the most powerful general-purpose loop and also the most complex.

If f is a function, fold f v e applies f v to the first element of e, then, calling acc_1 the result of this operation, applies f acc_1 to the second element of e, then, calling acc_2 the result of this operation, applies f acc_2 to the third element of e...

In other words, fold f v e returns v if e is empty, otherwise f (... (f (f v a0) a1) ...) aN where a0,a1..aN are the elements of e.

For instance, if add is the function fun x y -> x + y, fold add 0 is the function which computes the sum of the elements of an enumeration. Therefore, fold add 0 (1 -- 10) produces result 55.

val scanl : ('b -> 'a -> 'b) -> 'b -> 'a BatEnum.t -> 'b BatEnum.t

Functional loop on an enumeration, used to build an enumeration from both an enumeration and an initial value. This function may be seen as a variant of fold which returns not only the final result of fold but the enumeration of all the intermediate results of fold.

If f is a function, scanl f v e is applies f v to the first element of e, then, calling acc_1 the result of this operation, applies f acc_1 to the second element of e, then, calling acc_2 the result of this operation, applies f acc_2 to the third element of e...

For instance, if add is the function fun x y -> x + y, scanl add 0 is the function which computes the sum of the elements of an enumeration. Therefore, scanl add 0 (1 -- 10) produces result the enumeration with elements 0, 1, 3, 6, 10, 15, 21, 28, 36, 45, 55.

val (/@) : 'a BatEnum.t -> ('a -> 'b) -> 'b BatEnum.t
val (@/) : ('a -> 'b) -> 'a BatEnum.t -> 'b BatEnum.t

Mapping operators.

These operators have the same meaning as function map but are sometimes more readable than this function, when chaining several transformations in a row.

val (//@) : 'a BatEnum.t -> ('a -> 'b option) -> 'b BatEnum.t
val (@//) : ('a -> 'b option) -> 'a BatEnum.t -> 'b BatEnum.t

Map combined with filter. Same as filter_map.

Other operations on enumerations
val exists : ('a -> bool) -> 'a BatEnum.t -> bool

exists f e returns true if there is some x in e such that f x

val for_all : ('a -> bool) -> 'a BatEnum.t -> bool

for_all f e returns true if for every x in e, f x is true

val find : ('a -> bool) -> 'a BatEnum.t -> 'a

find f e returns the first element x of e such that f x returns true, consuming the enumeration up to and including the found element, or, raises Not_found if no such element exists in the enumeration, consuming the whole enumeration in the search.

Since find consumes a prefix of the enumeration, it can be used several times on the same enumeration to find the next element.

  • raises Not_found

    if no element in the whole enumeration satisfies the predicate

val peek : 'a BatEnum.t -> 'a option

peek e returns None if e is empty or Some x where x is the next element of e. The element is not removed from the enumeration.

val get : 'a BatEnum.t -> 'a option

get e returns None if e is empty or Some x where x is the next element of e, in which case the element is removed from the enumeration.

val push : 'a BatEnum.t -> 'a -> unit

push e x will add x at the beginning of e.

val junk : 'a BatEnum.t -> unit

junk e removes the first element from the enumeration, if any.

val filter : ('a -> bool) -> 'a BatEnum.t -> 'a BatEnum.t

filter f e returns an enumeration over all elements x of e such as f x returns true.

val (//) : 'a BatEnum.t -> ('a -> bool) -> 'a BatEnum.t

Filtering (pronounce this operator name "such that").

For instance, (1 -- 37) // odd is the enumeration of all odd numbers between 1 and 37.

val concat : 'a BatEnum.t BatEnum.t -> 'a BatEnum.t

concat e returns an enumeration over all elements of all enumerations of e.

val (--) : int -> int -> int BatEnum.t

Enumerate numbers.

5 -- 10 is the enumeration 5,6,7,8,9,10. 10 -- 5 is the empty enumeration

val (--^) : int -> int -> int BatEnum.t

Enumerate numbers, without the right endpoint

5 -- 10 is the enumeration 5,6,7,8,9.

val (--.) : (float * float) -> float -> float BatEnum.t

(a, step) --. b) creates a float enumeration from a to b with an increment of step between elements.

(5.0, 1.0) --. 10.0 is the enumeration 5.0,6.0,7.0,8.0,9.0,10.0. (10.0, -1.0) --. 5.0 is the enumeration 10.0,9.0,8.0,7.0,6.0,5.0. (10.0, 1.0) --. 1.0 is the empty enumeration.

val (---) : int -> int -> int BatEnum.t

As --, but accepts enumerations in reverse order.

5 --- 10 is the enumeration 5,6,7,8,9,10. 10 --- 5 is the enumeration 10,9,8,7,6,5.

val (--~) : char -> char -> char BatEnum.t

As ( -- ), but for characters.

val print : ?first:string -> ?last:string -> ?sep:string -> ('a BatInnerIO.output -> 'b -> unit) -> 'a BatInnerIO.output -> 'b BatEnum.t -> unit

Print and consume the contents of an enumeration.

Results
type ('a, 'e) result = ('a, 'e) BatInnerPervasives.result =
  1. | Ok of 'a
  2. | Error of 'e
    (*

    The result of a computation - either an Ok with the normal result or a Error with some value (often an exception) containing failure information

    *)

This type represents the outcome of a function which has the possibility of failure. Normal results of type 'a are marked with Ok, while failure values of type 'b are marked with Error.

This is intended to be a safer alternative to functions raising exceptions to signal failure. It is safer in that the possibility of failure has to be handled before the result of that computation can be used.

For more functions related to this type, see the BatResult module.

val ignore_ok : ('a, exn) result -> unit

ignore_ok (f x) ignores the result of f x if it's ok, but throws the exception contained if Error is returned.

val ok : ('a, exn) result -> 'a

f x |> ok unwraps the Ok result of f x and returns it, or throws the exception contained if Error is returned.

val wrap : ('a -> 'b) -> 'a -> ('b, exn) result

wrap f x wraps a function that would normally throw an exception on failure such that it now returns a result with either the Ok return value or the Error exception.

Thread-safety internals

Unless you are attempting to adapt Batteries Included to a new model of concurrency, you probably won't need this.

A lock used to synchronize internal operations.

By default, this is BatConcurrent.nolock. However, if you're using a version of Batteries compiled in threaded mode, this uses BatMutex. If you're attempting to use Batteries with another concurrency model, set the lock appropriately.

module Array : sig ... end
module Hashtbl : sig ... end
module List : sig ... end
module Map : sig ... end
module Queue : sig ... end
module Stack : sig ... end
module String : sig ... end
module Enum : sig ... end
module LazyList : sig ... end
module Seq : sig ... end
module Splay : sig ... end
OCaml

Innovation. Community. Security.

GitHub Discord Twitter Peertube RSS
About
Changelog Releases Industrial Users Academic Users Why OCaml
Ecosystem
Packages Community Events OCaml Planet Jobs
Resources
Install OCaml Get Started Platform Tools Language Manual Standard Library API Books Exercises Papers OCaml Playground Logo
Policies
Carbon Footprint Governance Privacy Code of Conduct