data-encoding 1.0.1 · OCaml Package

type 'a t = 'a Encoding.t

The type descriptors for values of type 'a.

type 'a encoding = 'a t

type string_json_repr =

| Hex
| Plain

Ground descriptors

voids

val null : unit encoding

Special value null in JSON, nothing in binary.

val empty : unit encoding

Empty object (not included in binary, encoded as empty object in JSON).

val unit : unit encoding

Unit value, omitted in binary. Serialized as an empty object in JSON, accepts any object when deserializing.

val constant : string -> unit encoding

Constant string (data is not included in the binary data).

ground numerical types

All encodings are big-endians.

8-bit integers (signed or unsigned) are encoded over 1 single byte.
16-bit integers (signed or unsigned) are encoded over 2 bytes.
31-bit integers are always signed and always encoded over 4 bytes.
32-bit integers are always signed and always encoded over 4 bytes.
64-bit integers are always signed and always encoded over 8 bytes.

A note on 31-bit integers. The internal representation of integers in OCaml reserves one bit for GC tagging. The remaining bits encode a signed integer. For compatibility with 32-bit machine, we restrict these native integers to the 31-bit range.

val int8 : int encoding

Signed 8 bit integer (data is encoded as a byte in binary and an integer in JSON).

val uint8 : int encoding

Unsigned 8 bit integer (data is encoded as a byte in binary and an integer in JSON).

val int16 : int encoding

Signed 16 bit integer (data is encoded as a short in binary and an integer in JSON).

val uint16 : int encoding

Unsigned 16 bit integer (data is encoded as a short in binary and an integer in JSON).

val int31 : int encoding

Signed 31 bit integer, which corresponds to type int on 32-bit OCaml systems (data is encoded as a 32 bit int in binary and an integer in JSON).

val int32 : int32 encoding

Signed 32 bit integer (data is encoded as a 32-bit int in binary and an integer in JSON).

val int64 : int64 encoding

Signed 64 bit integer (data is encoded as a 64-bit int in binary and a decimal string in JSON).

val ranged_int : int -> int -> int encoding

Integer with bounds in a given range. Both bounds are inclusive.

raises Invalid_argument
if the bounds are beyond the interval -2^30; 2^30-1. These bounds are chosen to be compatible with all versions of OCaml.

module Big_endian : sig ... end

Integers with the same ranges, restrictions, and representations as above. The endianness is explicitly (rather than implicitly) big.

module Little_endian : sig ... end

Integers with the same ranges and restrictions as above, but in little-endian representation. The JSON representation is unaffected.

val z : Z.t encoding

Big number

In JSON, data is encoded as a string containing the decimal representation of the number.

In binary, data is encoded as a variable length sequence of bytes, with a running unary size bit: the most significant bit of each byte tells is this is the last byte in the sequence (0) or if there is more to read (1). The second most significant bit of the first byte is reserved for the sign (positive if zero). Sizing and sign bits ignored, data is then the binary representation of the absolute value of the number in little-endian order.

val n : Z.t encoding

Positive big number.

In JSON, data is encoded as a string containing the decimal representation of the number.

In binary, data is encoded similarly to z but the sign bit is omitted. In other words:

Data is encoded as a variable length sequence of bytes, with a running unary size bit: the most significant bit of each byte tells is this is the last byte in the sequence (0) or if there is more to read (1). Sizing bits ignored, data is then the binary representation of the number in little-endian order.

val uint_like_n : ?max_value:int -> unit -> int encoding

uint_like_n () is an encoding for int which uses the same representation as n.

For compatibility with 32-bit machines, this encoding supports the same range of encodings as int31, but only the positive ones. I.e., it supports the inclusive range 0 to (1 lsl 30) - 1.

The optional parameter ?max_value can be used to further restrict the range of values. If max_value is set and is greater than (1 lsl 30) - 1 then the function raises Invalid_argument.

The encoding is partial: attempting to de/serialise values which are outside of the supported range will fail. In addition, in binary, a maximum size for the serialised representation is computed based on the maximum value in the range, and the de/serialisation process fails before attempting any conversion if the size is exceeded.

raises Invalid_argument
if max_value < 0 or max_value > (1 lsl 30) - 1

val int_like_z : ?min_value:int -> ?max_value:int -> unit -> int encoding

int_like_z () is an encoding for int which uses the same representation as z.

For compatibility with 32-bit machines, this encoding supports the same range of encodings as int31. I.e., it supports the inclusive range -(1 lsl 30) to (1 lsl 30) - 1.

The optional parameters ?min_value and ?max_value can be used to further restrict the range of values. If min_value is set and less than -(1 lsl 30) or if max_value is set and is greater than (1 lsl 30) - 1 then the function raises Invalid_argument.

The encoding is partial: attempting to de/serialise values which are outside of the supported range will fail. In addition, in binary, a maximum size for the serialised representation is computed based on the encoding's range, and the de/serialisation process fails before attempting any conversion if the size is exceeded.

raises Invalid_argument
if max_value < min_value

raises Invalid_argument
if max_value > (1 lsl 30) - 1

raises Invalid_argument
if min_value < -(1 lsl 30)

val float : float encoding

Encoding of floating point number (encoded as a floating point number in JSON and a double in binary).

val ranged_float : float -> float -> float encoding

Float with bounds in a given range. Both bounds are inclusive

Other ground type encodings

val bool : bool encoding

Encoding of a boolean (data is encoded as a byte in binary and a boolean in JSON).

val string' : 
  ?length_kind:[ `N | `Uint30 | `Uint16 | `Uint8 ] ->
  string_json_repr ->
  string encoding

Encoding of a string

In binary, encoded as a byte sequence prefixed by the length of the string. The length is represented as specified by the length_kind parameter (default `Uint30).
in JSON when string_json_repr = Plain, encoded as a string
in JSON when string_json_repr = Hex, encoded via hex.

val bytes' : 
  ?length_kind:[ `N | `Uint30 | `Uint16 | `Uint8 ] ->
  string_json_repr ->
  Stdlib.Bytes.t encoding

Encoding of arbitrary bytes. See string'

val string : string encoding

same as string' Plain

val bytes : Stdlib.Bytes.t encoding

same as bytes' Hex

type bigstring =
  (char, Stdlib.Bigarray.int8_unsigned_elt, Stdlib.Bigarray.c_layout)
    Stdlib.Bigarray.Array1.t

val bigstring : 
  ?length_kind:[ `N | `Uint30 | `Uint16 | `Uint8 ] ->
  ?string_json_repr:string_json_repr ->
  unit ->
  bigstring encoding

same as string' but for bigstring.

Descriptor combinators

val option : 'a encoding -> 'a option encoding

Combinator to make an optional value (represented as a 1-byte tag followed by the data (or nothing) in binary and either the raw value or a null in JSON).

Note that the JSON representation is only weakly discriminating. Specifically, the value Some None is represented as the raw value None and so the two are indistinguishable. For this reason, this combinator does not support nesting, nor does it support use within a recursive (mu) encoding.

raises Invalid_argument
if called on an encoding which may be represented as null in JSON. This includes an encoding of the form option _, conv _ _ (option _), dynamic_size (option _), etc.

raises Invalid_argument
if called within the body of a mu.

val result : 'a encoding -> 'b encoding -> ('a, 'b) Stdlib.result encoding

Combinator to make a result value (represented as a 1-byte tag followed by the data of either type in binary, and either unwrapped value in JSON (the caller must ensure that both encodings do not collide)).

val array : ?max_length:int -> 'a encoding -> 'a array encoding

Array combinator.

encoded as an array in JSON
encoded as the concatenation of all the element in binary prefixed by its size in bytes

parameter [max_length]
If max_length is passed and the encoding of elements has fixed size, a check_size is automatically added for earlier rejection.

raises Invalid_argument
if the inner encoding is variable.

val array_with_length : 
  ?max_length:int ->
  [ `N | `Uint8 | `Uint16 | `Uint30 ] ->
  'a encoding ->
  'a array encoding

Array combinator.

encoded as an array in JSON
encoded as the concatenation of its length (number of elements) and all the element in binary

parameter kind
([`N | `Uint8 | `Uint16 | `Uint30]) controls the representation of the length: uint_like_n, uint8, uint16, or int31 (but only positive values).

parameter [max_length]
If max_length is passed and the encoding of elements has fixed size, a check_size is automatically added for earlier rejection.

raises Invalid_argument
if the inner encoding is variable.

val list : ?max_length:int -> 'a encoding -> 'a list encoding

List combinator.

encoded as an array in JSON
encoded as the concatenation of all the element in binary prefixed by its size in bytes

parameter [max_length]
If max_length is passed and the encoding of elements has fixed size, a check_size is automatically added for earlier rejection.

raises Invalid_argument
if the inner encoding is variable.

val list_with_length : 
  ?max_length:int ->
  [ `N | `Uint8 | `Uint16 | `Uint30 ] ->
  'a encoding ->
  'a list encoding

List combinator.

encoded as an array in JSON
encoded as the concatenation of its length (number of elements) and all the element in binary

parameter kind
([`N | `Uint8 | `Uint16 | `Uint30]) controls the representation of the length: uint_like_n, uint8, uint16, or int31 (but only positive values).

parameter [max_length]
If max_length is passed and the encoding of elements has fixed size, a check_size is automatically added for earlier rejection.

raises Invalid_argument
if the inner encoding is variable.

val conv : 
  ('a -> 'b) ->
  ('b -> 'a) ->
  ?schema:Json_schema.schema ->
  'b encoding ->
  'a encoding

Provide a transformer from one encoding to a different one.

Used to simplify nested encodings or to change the generic tuples built by obj1, tup1 and the like into proper records.

A schema may optionally be provided as documentation of the new encoding.

val conv_with_guard : 
  ('a -> 'b) ->
  ('b -> ('a, string) Stdlib.result) ->
  ?schema:Json_schema.schema ->
  'b encoding ->
  'a encoding

conv_with_guard is similar to conv but the function that takes in the value from the outside (untrusted) world has a chance to fail.

Specifically, if the function returns Error msg then the decoding is interrupted with an error carrying the message msg. If the function returns Ok _ then the decoding proceeds normally.

val with_decoding_guard : 
  ('a -> (unit, string) Stdlib.result) ->
  'a encoding ->
  'a encoding

with_decoding_guard g e is similar to e but decoding fails if g returns Error _ on the decoded value.

val assoc : 'a encoding -> (string * 'a) list encoding

Association list. An object in JSON, a list of pairs in binary.

Product descriptors

type 'a field

An enriched encoding to represent a component in a structured type, augmenting the encoding with a name and whether it is a required or optional. Fields are used to encode OCaml tuples as objects in JSON, and as sequences in binary, using combinator obj1 and the like.

val req : 
  ?title:string ->
  ?description:string ->
  string ->
  't encoding ->
  't field

Required field.

val opt : 
  ?title:string ->
  ?description:string ->
  string ->
  't encoding ->
  't option field

Optional field. Omitted entirely in JSON encoding if None. Omitted in binary if the only optional field in a `Variable encoding, otherwise a 1-byte prefix (`0` or `255`) tells if the field is present or not.

val varopt : 
  ?title:string ->
  ?description:string ->
  string ->
  't encoding ->
  't option field

Optional field of variable length. Only one can be present in a given object.

val dft : 
  ?title:string ->
  ?description:string ->
  string ->
  't encoding ->
  't ->
  't field

Required field with a default value. If the default value is passed, the field is omitted in JSON. The value is always serialized in binary.

Constructors for objects with N fields

These are serialized to binary by converting each internal object to binary and placing them in the order of the original object. These are serialized to JSON as a JSON object with the field names. An object might only contains one 'variable' field, typically the last one. If the encoding of more than one field are 'variable', the first ones should be wrapped with dynamic_size.

raises Invalid_argument
if more than one field is a variable one.

val obj1 : 'f1 field -> 'f1 encoding

val obj2 : 'f1 field -> 'f2 field -> ('f1 * 'f2) encoding

val obj3 : 'f1 field -> 'f2 field -> 'f3 field -> ('f1 * 'f2 * 'f3) encoding

val obj4 : 
  'f1 field ->
  'f2 field ->
  'f3 field ->
  'f4 field ->
  ('f1 * 'f2 * 'f3 * 'f4) encoding

val obj5 : 
  'f1 field ->
  'f2 field ->
  'f3 field ->
  'f4 field ->
  'f5 field ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5) encoding

val obj6 : 
  'f1 field ->
  'f2 field ->
  'f3 field ->
  'f4 field ->
  'f5 field ->
  'f6 field ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6) encoding

val obj7 : 
  'f1 field ->
  'f2 field ->
  'f3 field ->
  'f4 field ->
  'f5 field ->
  'f6 field ->
  'f7 field ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7) encoding

val obj8 : 
  'f1 field ->
  'f2 field ->
  'f3 field ->
  'f4 field ->
  'f5 field ->
  'f6 field ->
  'f7 field ->
  'f8 field ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7 * 'f8) encoding

val obj9 : 
  'f1 field ->
  'f2 field ->
  'f3 field ->
  'f4 field ->
  'f5 field ->
  'f6 field ->
  'f7 field ->
  'f8 field ->
  'f9 field ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7 * 'f8 * 'f9) encoding

val obj10 : 
  'f1 field ->
  'f2 field ->
  'f3 field ->
  'f4 field ->
  'f5 field ->
  'f6 field ->
  'f7 field ->
  'f8 field ->
  'f9 field ->
  'f10 field ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7 * 'f8 * 'f9 * 'f10) encoding

val merge_objs : 'o1 encoding -> 'o2 encoding -> ('o1 * 'o2) encoding

Create a larger object from the encodings of two smaller ones.

raises Invalid_argument
if both arguments are not objects or if both tuples contains a variable field..

module With_field_name_duplicate_checks : sig ... end

With_field_name_duplicate_checks is a subset of Encoding where all the constructed objects are checked for duplicates.

Constructors for tuples with N fields

These are serialized to binary by converting each internal object to binary and placing them in the order of the original object. These are serialized to JSON as JSON arrays/lists. Like objects, a tuple might only contains one 'variable' field, typically the last one. If the encoding of more than one field are 'variable', the first ones should be wrapped with dynamic_size.

raises Invalid_argument
if more than one field is a variable one.

val tup1 : 'f1 encoding -> 'f1 encoding

val tup2 : 'f1 encoding -> 'f2 encoding -> ('f1 * 'f2) encoding

val tup3 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  ('f1 * 'f2 * 'f3) encoding

val tup4 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  'f4 encoding ->
  ('f1 * 'f2 * 'f3 * 'f4) encoding

val tup5 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  'f4 encoding ->
  'f5 encoding ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5) encoding

val tup6 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  'f4 encoding ->
  'f5 encoding ->
  'f6 encoding ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6) encoding

val tup7 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  'f4 encoding ->
  'f5 encoding ->
  'f6 encoding ->
  'f7 encoding ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7) encoding

val tup8 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  'f4 encoding ->
  'f5 encoding ->
  'f6 encoding ->
  'f7 encoding ->
  'f8 encoding ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7 * 'f8) encoding

val tup9 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  'f4 encoding ->
  'f5 encoding ->
  'f6 encoding ->
  'f7 encoding ->
  'f8 encoding ->
  'f9 encoding ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7 * 'f8 * 'f9) encoding

val tup10 : 
  'f1 encoding ->
  'f2 encoding ->
  'f3 encoding ->
  'f4 encoding ->
  'f5 encoding ->
  'f6 encoding ->
  'f7 encoding ->
  'f8 encoding ->
  'f9 encoding ->
  'f10 encoding ->
  ('f1 * 'f2 * 'f3 * 'f4 * 'f5 * 'f6 * 'f7 * 'f8 * 'f9 * 'f10) encoding

val merge_tups : 'a1 encoding -> 'a2 encoding -> ('a1 * 'a2) encoding

Create a large tuple encoding from two smaller ones.

raises Invalid_argument
if both values are not tuples or if both tuples contains a variable field.

Sum descriptors

type 't case

A partial encoding to represent a case in a variant type. Hides the (existentially bound) type of the parameter to the specific case, providing its encoder, and converter functions to and from the union type.

type case_tag =

| Tag of int
| Json_only

type 'a matching_function = 'a -> match_result

A sum descriptor can be optimized by providing a specific matching_function which efficiently determines in which case some value of type 'a falls.

Note that in general you should use a total function (i.e., one defined over the whole of the 'a type) for the matching_function. However, in the case where you have a good reason to use a partial function, you should raise No_case_matched in the dead branches. Reasons why you may want to do so include:

'a is an open variant and you will complete the matching function later, and
there is a code invariant that guarantees that 'a is not fully inhabited.

and match_result

val matched : 
  ?tag_size:[ `Uint8 | `Uint16 ] ->
  int ->
  'a encoding ->
  'a ->
  match_result

matched t e u represents the fact that a value is tagged with t and carries the payload u which can be encoded with e.

The optional argument tag_size must match the one passed to the matching function matched is called inside of.

An example is given in the documentation of matching.

raises [Invalid_argument]
if t < 0

raises [Invalid_argument]
if t does not fit in tag_size

val case : 
  title:string ->
  ?description:string ->
  case_tag ->
  'a encoding ->
  ('t -> 'a option) ->
  ('a -> 't) ->
  't case

Encodes a variant constructor. Takes the encoding for the specific parameters, a recognizer function that will extract the parameters in case the expected case of the variant is being serialized, and a constructor function for deserialization.

The tag must be less than the tag size of the union in which you use the case. An optional tag gives a name to a case and should be used to maintain compatibility.

An optional name for the case can be provided, which is used in the binary documentation.

raises [Invalid_argument]
if case_tag is Tag t with t < 0

val matching : 
  ?tag_size:[ `Uint8 | `Uint16 ] ->
  't matching_function ->
  't case list ->
  't encoding

Create a single encoding from a series of cases.

In JSON, all cases are tried one after the other using the case list. The caller is responsible for avoiding collisions. If there are collisions (i.e., if multiple cases produce the same JSON output) then the encoding and decoding processes might not be inverse of each other. In other words, destruct e (construct e v) may not be equal to v.

In binary, a prefix tag is added to discriminate quickly between cases. The default is `Uint8 and you must use a `Uint16 if you are going to have more than 256 cases.

The matching function is used during binary encoding of a value v to efficiently determine which of the cases corresponds to v. The case list is used during decoding to reconstruct a value based on the encoded tag. (Decoding is optimised internally: tag look-up has a constant cost.)

The caller is responsible for ensuring that the matching_function and the case list describe the same encoding. If they describe different encodings, then the decoding and encoding processes will not be inverses of each others. In other words, of_bytes e (to_bytes e v) will not be equal to v.

If you do not wish to be responsible for this, you can use the unoptimised union that uses a case list only (see below). Beware that in union the complexity of the encoding is linear in the number of cases.

Following: a basic example use. Note that the matching_function uses the same tags, payload conversions, and payload encoding as the case list.

type t = A of string | B of int * int | C
let encoding_t =
  (* Tags and payload encodings for each constructors *)
  let a_tag = 0 and a_encoding = string in
  let b_tag = 1 and b_encoding = obj2 (req "x" int) (req "y" int) in
  let c_tag = 2 and c_encoding = unit in
  matching
    (* optimised encoding function *)
    (function
       | A s -> matched a_tag a_encoding s
       | B (x, y) -> matched b_tag b_encoding (x, y)
       | C -> matched c_tag c_encoding ())
    (* decoding case list *)
    [
       case ~title:"A"
         (Tag a_tag)
         a_encoding
         (function A s -> Some s | _ -> None) (fun s -> A s);
       case ~title:"B"
         (Tag b_tag)
         b_encoding
         (function B (x, y) -> Some (x, y) | _ -> None) (fun (x, y) -> B (x, y));
       case ~title:"C"
         (Tag c_tag)
         c_encoding
         (function C -> Some () | _ -> None) (fun () -> C);
    ]

raises [Invalid_argument]
if it is given an empty case list

raises [Invalid_argument]
if there are more than one case with the same tag in the case list

raises [Invalid_argument]
if there are more cases in the case list than can fit in the tag_size

val union : ?tag_size:[ `Uint8 | `Uint16 ] -> 't case list -> 't encoding

Same as matching except that the matching function is a linear traversal of the cases.

raises [Invalid_argument]
if it is given an empty case list

raises [Invalid_argument]
if there are more than one case with the same tag in the case list

raises [Invalid_argument]
if there are more cases in the case list than can fit in the tag_size

module With_JSON_discriminant : sig ... end

With_JSON_discriminant is a subset of Encoding where the union/matching combinators (and associated functions) add discriminant for the JSON backend.

Predicates over descriptors

val is_obj : 'a encoding -> bool

Is the given encoding serialized as a JSON object?

val is_tup : 'a encoding -> bool

Does the given encoding encode a tuple?

val classify : 'a encoding -> [ `Fixed of int | `Dynamic | `Variable ]

Classify the binary serialization of an encoding as explained in the preamble.

Specialized descriptors

val string_enum : (string * 'a) list -> 'a encoding

Encode enumeration via association list

represented as a string in JSON and
represented as an integer representing the element's position in the list in binary. The integer size depends on the list size.

module Fixed : sig ... end

Create encodings that produce data of a fixed length when binary encoded. See the preamble for an explanation.

module Variable : sig ... end

Create encodings that produce data of a variable length when binary encoded. See the preamble for an explanation.

module Bounded : sig ... end

val dynamic_size : 
  ?kind:[ `N | `Uint30 | `Uint16 | `Uint8 ] ->
  'a encoding ->
  'a encoding

Mark an encoding as being of dynamic size. Forces the size to be stored alongside content when needed. Typically used to combine two variable encodings in a same objects or tuple, or to use a variable encoding in an array or a list.

val check_size : int -> 'a encoding -> 'a encoding

check_size size encoding ensures that the binary encoding of a value will not be allowed to exceed size bytes. The reader and the writer fails otherwise. This function do not modify the JSON encoding.

raises Invalid_argument
if size < 0

val delayed : (unit -> 'a encoding) -> 'a encoding

Recompute the encoding definition each time it is used. Useful for dynamically updating the encoding of values of an extensible type via a global reference (e.g., exceptions).

val splitted : json:'a encoding -> binary:'a encoding -> 'a encoding

Define different encodings for JSON and binary serialization.

val mu : 
  string ->
  ?title:string ->
  ?description:string ->
  ('a encoding -> 'a encoding) ->
  'a encoding

Combinator for recursive encodings.

Notice that the function passed to mu must be pure. Otherwise, the behavior is unspecified.

A stateful recursive encoding can still be put under a delayed combinator to make sure that a new encoding is generated each time it is used. Caching the encoding generation when the state has not changed is then the responsability of the client.

Documenting descriptors

val def : 
  string ->
  ?title:string ->
  ?description:string ->
  't encoding ->
  't encoding

Give a name to an encoding and optionally add documentation to an encoding.

type 'a lazy_t

See lazy_encoding below.

val lazy_encoding : 'a encoding -> 'a lazy_t encoding

Combinator to have a part of the binary encoding lazily deserialized. This is transparent on the JSON side.

val force_decode : 'a lazy_t -> 'a option

Force the decoding (memoized for later calls), and return the value if successful.

val force_bytes : 'a lazy_t -> Stdlib.Bytes.t

Obtain the bytes without actually deserializing. Will serialize and memoize the result if the value is not the result of a lazy deserialization.

val make_lazy : 'a encoding -> 'a -> 'a lazy_t

Make a lazy value from an immediate one.

val apply_lazy : 
  fun_value:('a -> 'b) ->
  fun_bytes:(Stdlib.Bytes.t -> 'b) ->
  fun_combine:('b -> 'b -> 'b) ->
  'a lazy_t ->
  'b

Apply on structure of lazy value, and combine results

module Compact : sig ... end

This module provides specialized encoding combinators that are implemented to reduce the size of the serialization result.

type 'a compact = 'a Compact.t

package data-encoding