package core

  1. Overview
  2. Docs
package core
Legend:
Library
Module
Module type
Parameter
Class
Class type
type t = {
  1. minor_heap_size : Base.Int.t;
    (*

    The size (in words) of the minor heap. Changing this parameter will trigger a minor collection.

    Under the OCaml 5 runtime: the total size of the minor heap used by the program can be obtained by summing the the heap sizes of the active domains.

    Default: 262144 words / 1MB (32bit) / 2MB (64bit).

    *)
  2. major_heap_increment : Base.Int.t;
    (*

    How much to add to the major heap when increasing it. If this number is less than or equal to 1000, it is a percentage of the current heap size (i.e. setting it to 100 will double the heap size at each increase). If it is more than 1000, it is a fixed number of words that will be added to the heap. Default: 15%.

    *)
  3. space_overhead : Base.Int.t;
    (*

    The major GC speed is computed from this parameter. This is the memory that will be "wasted" because the GC does not immediately collect unreachable blocks. It is expressed as a percentage of the memory used for live data. The GC will work more (use more CPU time and collect blocks more eagerly) if space_overhead is smaller. Default: 80 for the OCaml 4 runtime, 120 for the OCaml 5 runtime (the latter subject to change).

    *)
  4. verbose : Base.Int.t;
    (*

    This value controls the GC messages on standard error output. It is a sum of some of the following flags, to print messages on the corresponding events:

    • 0x001 Start of major GC cycle.
    • 0x002 Minor collection and major GC slice.
    • 0x004 Growing and shrinking of the heap.
    • 0x008 Resizing of stacks and memory manager tables.
    • 0x010 Heap compaction.
    • 0x020 Change of GC parameters.
    • 0x040 Computation of major GC slice size.
    • 0x080 Calling of finalisation functions.
    • 0x100 Bytecode executable search at start-up.
    • 0x200 Computation of compaction triggering condition.
    • 0x400 Output GC statistics at program exit (OCaml 5 runtime only). Default: 0.
    *)
  5. max_overhead : Base.Int.t;
    (*

    Heap compaction is triggered when the estimated amount of "wasted" memory is more than max_overhead percent of the amount of live data. If max_overhead is set to 0, heap compaction is triggered at the end of each major GC cycle (this setting is intended for testing purposes only). If max_overhead >= 1000000, compaction is never triggered. Default: 500.

    *)
  6. stack_limit : Base.Int.t;
    (*

    The maximum size of the stack (in words). This is only relevant to the byte-code runtime, as the native code runtime uses the operating system's stack. Default: 1048576 words / 4MB (32bit) / 8MB (64bit).

    *)
  7. allocation_policy : Base.Int.t;
    (*

    The policy used for allocating in the heap. Possible values are 0 and 1. 0 is the next-fit policy, which is quite fast but can result in fragmentation. 1 is the first-fit policy, which can be slower in some cases but can be better for programs with fragmentation problems. Default: 0.

    *)
  8. window_size : Base.Int.t;
    (*

    The size of the window used by the major GC for smoothing out variations in its workload. This is an integer between 1 and 50. Default: 1.

    • since 4.03.0
    *)
  9. custom_major_ratio : Base.Int.t;
    (*

    Target ratio of floating garbage to major heap size for out-of-heap memory held by custom values located in the major heap. The GC speed is adjusted to try to use this much memory for dead values that are not yet collected. Expressed as a percentage of major heap size. The default value keeps the out-of-heap floating garbage about the same size as the in-heap overhead. Note: this only applies to values allocated with caml_alloc_custom_mem (e.g. bigarrays). Default: 44.

    • since 4.08.0
    *)
  10. custom_minor_ratio : Base.Int.t;
    (*

    Bound on floating garbage for out-of-heap memory held by custom values in the minor heap. A minor GC is triggered when this much memory is held by custom values located in the minor heap. Expressed as a percentage of minor heap size. Note: this only applies to values allocated with caml_alloc_custom_mem (e.g. bigarrays). Default: 100.

    • since 4.08.0
    *)
  11. custom_minor_max_size : Base.Int.t;
    (*

    Maximum amount of out-of-heap memory for each custom value allocated in the minor heap. When a custom value is allocated on the minor heap and holds more than this many bytes, only this value is counted against custom_minor_ratio and the rest is directly counted against custom_major_ratio. Note: this only applies to values allocated with caml_alloc_custom_mem (e.g. bigarrays). Default: 8192 bytes.

    • since 4.08.0
    *)
}
val sexp_of_t : t -> Sexplib0.Sexp.t
module Fields : sig ... end
include Comparable.S_plain with type t := t
include Base.Comparable.S with type t := t
include Base.Comparisons.S with type t := t
include Base.Comparisons.Infix with type t := t
val (>=) : t -> t -> bool
val (<=) : t -> t -> bool
val (=) : t -> t -> bool
val (>) : t -> t -> bool
val (<) : t -> t -> bool
val (<>) : t -> t -> bool
val equal : t -> t -> bool
val compare : t -> t -> int

compare t1 t2 returns 0 if t1 is equal to t2, a negative integer if t1 is less than t2, and a positive integer if t1 is greater than t2.

val min : t -> t -> t
val max : t -> t -> t
val ascending : t -> t -> int

ascending is identical to compare. descending x y = ascending y x. These are intended to be mnemonic when used like List.sort ~compare:ascending and List.sort ~cmp:descending, since they cause the list to be sorted in ascending or descending order, respectively.

val descending : t -> t -> int
val between : t -> low:t -> high:t -> bool

between t ~low ~high means low <= t <= high

val clamp_exn : t -> min:t -> max:t -> t

clamp_exn t ~min ~max returns t', the closest value to t such that between t' ~low:min ~high:max is true.

Raises if not (min <= max).

val clamp : t -> min:t -> max:t -> t Base.Or_error.t
include Base.Comparator.S with type t := t
type comparator_witness
val validate_lbound : min:t Maybe_bound.t -> t Validate.check
val validate_ubound : max:t Maybe_bound.t -> t Validate.check
val validate_bound : min:t Maybe_bound.t -> max:t Maybe_bound.t -> t Validate.check
OCaml

Innovation. Community. Security.

GitHub Discord Twitter Peertube RSS
About
Changelog Releases Industrial Users Academic Users Why OCaml
Ecosystem
Packages Community Events OCaml Planet Jobs
Resources
Install OCaml Get Started Platform Tools Language Manual Standard Library API Books Exercises Papers OCaml Playground Logo
Policies
Carbon Footprint Governance Privacy Code of Conduct