Library
Module
Module type
Parameter
Class
Class type
include Vchan.S.ENDPOINT with type port = Vchan.Port.t
type port = Vchan.Port.t
Type of a vchan port name.
include Mirage_flow.S with type flow = t
val pp_error : error Fmt.t
pp_error
is the pretty-printer for errors.
The type for write errors.
val pp_write_error : write_error Fmt.t
pp_write_error
is the pretty-printer for write errors.
type flow = t
The type for flows. A flow represents the state of a single reliable stream that is connected to an endpoint.
val read : flow -> (Cstruct.t Mirage_flow.or_eof, error) Stdlib.result Lwt.t
read flow
blocks until some data is available and returns a fresh buffer containing it.
The returned buffer will be of a size convenient to the flow implementation, but will always have at least 1 byte.
When read
returns `Eof
or an error, close
(or shutdown
) should be called on the flow
by the client. Once read
returned `Eof
or an error, no subsequent read
call will be successful.
val write : flow -> Cstruct.t -> (unit, write_error) Stdlib.result Lwt.t
write flow buffer
writes a buffer to the flow. There is no indication when the buffer has actually been sent and, therefore, it must not be reused. The contents may be transmitted in separate packets, depending on the underlying transport. The result Ok ()
indicates success, Error `Closed
indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.
The promise is resolved when the buffer has been accepted by the implementation (if a partial write occured, write
will wait until the remainder of the buffer has been accepted by the implementation).
If write
returns an error, close
(or shutdown
) should be called on the flow
by the client. Once write
returned an error, no subsequent write
or writev
call will be successful.
val writev : flow -> Cstruct.t list -> (unit, write_error) Stdlib.result Lwt.t
writev flow buffers
writes a sequence of buffers to the flow. There is no indication when the buffers have actually been sent and, therefore, they must not be reused. The result Ok ()
indicates success, Error `Closed
indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.
The promise is resolved when the buffers have been accepted by the implementation (if a partial write occured, writev
will wait until all buffers have been accepted by the implementation).
If writev
returns an error, close
(or shutdown
) should be called on the flow
by the client. Once writev
returned an error, no subsequent writev
or write
call will be successful.
shutdown flow mode
shuts down the flow
for the specific mode
: A flow which is shutdown `read
(or `read_write
) will never be read
again (subsequent calls will return `Eof
); a flow which is shutdown `write
(or `read_write
) flushes all pending writes and signals the remote endpoint there won't be any future write
or writev
calls (subsequent calls will return `Closed
). E.g. in TCP, the signalling is done by sending a segment with the FIN flag.
If this flow
is layered upon another flow'
(e.g. TLS over TCP), and the internal state after shutdown
is `Closed
, close
on the underlying flow'
is executed.
close flow
terminates the flow
and frees all associated data. Any subsequent read
or write
will return an error. A subsequent close
will not do anything (esp. not raising an exception), but it may log an error.
If this flow
is layered upon another flow'
(e.g. TLS over TCP), close
on the underlying flow'
is executed.